Electronics Forum | Thu Aug 20 13:59:42 EDT 2009 | dcell_1t
Hi there! After various trial-error experiments we determined that two factors are the most insignificant in order to reduce or make worst the issue, those factors are: Placement force: regular placement vs "force applied" to dip the component on th
Electronics Forum | Thu Nov 19 13:01:40 EST 2009 | deanm
I'm assuming that 18k components per month represents less than 100 boards per month. I've worked for both OEMs and CEMs and if your design is stable and your volumes are relatively stable I would highly recommend going with a CEM given the low volum
Electronics Forum | Mon Jul 07 00:45:39 EDT 2014 | comatose
If you study how the process is done now, it isn't that different from what you describe. Instead of glue, we use solder paste, and instead of spraying it we screen print it. But not that different. For feeding boards we use conveyors instead of rubb
Electronics Forum | Tue Nov 08 10:52:29 EST 2016 | aemery
Tom, Hardware limit means the machine thinks it is at the limit sensor or a particular axis timed out before it got to the home sensor during the reset sequence. Go to your O/I map and see if any of the axis limit sensors are lit. You could have a
Electronics Forum | Thu Oct 04 00:14:21 EDT 2018 | gaintstar
Flason SMT universal products: http://www.flason-smt.com/product/Touch-screen-Manual-stencil-printing-machine-solder-paste-printer.html http://www.flason-smt.com/product/Universal-8mm-CT0892-Feeder.html http://www.flason-smt.com/product/Universal-Gen
Electronics Forum | Wed Feb 13 08:15:05 EST 2019 | SMTA-Joe
We recently had an in-house demo with the smaller IR bottom heater PACE machine. The machine was barely able to remove some components, but could not replace new ones at all. Also, the nozzle for the hot air would not fit in the tight areas of the ho
Electronics Forum | Sun Mar 22 09:10:54 EDT 2020 | kumarb
Hi Steve. Just came across your post. We are in the same boat with our Ekra X4 printer. Any resolution on your side? We have been attempting to track down a fresh ballast but the original (OSRAM HF 2x36 dimmable with 0-10V) is EOL and no where to be
Electronics Forum | Thu Apr 09 15:31:05 EDT 2020 | kumarb
Thank you for the replies. Neither the analog dimmable ballast (1-10V) nor the dimmable T5 2G11 socket bulbs have been fun to source. After countless hours of searching, believe that the Ebay listing here (Philips) is compatible: https://www.ebay.co
Electronics Forum | Thu Jul 04 17:48:28 EDT 2024 | assuredtech
I don't know who manufactures the SMT 460 machine or what it's capabilities and configuration or machine settings are applicable to this topic but some common process of eliminations are: Component packages (doesn't seem to be an issue here), Board s
Electronics Forum | Fri Aug 18 00:23:21 EDT 2006 | umar
Hi SWAG/Rush/Steve, Thanks for your response, Currently I am running with 811 lead paste. Actually this problem not only effect for one assy. I got 700 models runing at my company, but almost 50% of the model I have problem with solder balls issue.