Electronics Forum | Tue May 29 09:58:32 EDT 2007 | davef
Is the component solderable per ANSI/J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires?
Electronics Forum | Wed Jun 20 08:46:15 EDT 2012 | jdengler
Hello all, We have a customer requesting the use of Sn95/Sb5. Of course they are in a hurry and I have not found any in stock. I need solder paste and cored wire. We can use water soluble or low residue (no-clean) flux. Anyone have a lead on a s
Electronics Forum | Sat Jul 17 01:23:29 EDT 1999 | Scott McKee
| | | | I need a good chemical to remove the lacquer finish off of magnet wire. I know there are different kinds but I need one that really works. Any suggestions would be great. thanks in advance guys. | | | | | | | What is it you're trying to do?
Electronics Forum | Thu Mar 11 12:45:40 EST 2004 | Daniele
Hi I have a question about proper installing thermocopule to PCB. I have thermocouple which consist of two wires and they are conected at the end by solder bead. I would like to use adhesive tape to connetct it to the PCB. Should i remove solder bea
Electronics Forum | Tue Apr 11 16:42:56 EDT 2000 | Chad Notebaert
I�m thinking �Poor intermatallic� It could be a few things. Lets start at the beginning. -Is your paste a 63/37 mixture? -Have you monitored you screen printing, Verify Solder deposition, Are you getting enough paste? -You say the solder looks like i
Electronics Forum | Tue Apr 20 17:19:38 EDT 2004 | Mike
1. Which manufacturers have proven the immersion silver is reliable after solder joint assembly? 2. Who has published guidelines for storing and handling immersion silver boards? 3. Is the immersion silver finish wire bondable? epoxy bondable? or j
Electronics Forum | Wed Apr 30 21:00:36 EDT 2003 | davef
ENIG is a common solderability protection on BGA packages. Pd/Ni/Au while more expensive could have advantages over ENIG in the following area: * Allow both gold and aluminium wire bonding * Better solder resist compatibility (63�C max) * Might take
Electronics Forum | Fri May 02 11:09:13 EDT 2014 | pawloa
Hello. We have a Minipak 300 wave solder machine from Electrovert and are looking in particular for a tachometer that attaches on the finger conveyor motor to measure the speed in pulses. We are also looking for the thermocouple that is used to moni
Electronics Forum | Wed Oct 18 08:00:53 EDT 2006 | davef
Have you tested the solderability of the inbound components per ANSI/J-STD-002, Solderability Tests for Component Leads, Terminations, Lugs, Terminals, and Wires?
Electronics Forum | Mon Oct 03 09:24:38 EDT 2005 | John S.
We are implementing a high volume dedicated product line that will be doing lead free selective soldering. There seems to be 3 basic technologies. Wire fed (Panasonic Softbeam or Laser), solder pumps and chimneys (Pillarhouse, SEHO, ERSA, etc) and