Electronics Forum | Fri Jul 24 16:42:03 EDT 2015 | cnotebaert
how are you verifying solder is the part not working electrically, are you x-raying?
Electronics Forum | Wed Aug 12 11:09:42 EDT 2015 | jvalverde
Hello, I have a problem with the solder paste process, I need a solder paste with no Start-up Time because We do not work 24 hours in the manufacturing process, we works only 8 hours a day and at the finish we need to store the paste in the refr
Electronics Forum | Tue Nov 03 09:49:08 EST 2015 | gregoryyork
how long are your squeegees for 3 - 5Kg pressure?
Electronics Forum | Fri Nov 06 11:56:43 EST 2015 | derrikf
They're probably 12 - 18 inches, maybe slightly longer.
Electronics Forum | Sat Sep 05 22:59:23 EDT 2015 | milroy
Hi, Thank you for the information. I have read his writings about this topic.
Electronics Forum | Tue Nov 03 00:11:51 EST 2015 | bwetman
"For this please visit the http://www.solder.net/services/"
Electronics Forum | Tue Oct 27 08:31:34 EDT 2015 | bwetman
"Hello, if you have any querry about PCB you can visit at solder.net"
Electronics Forum | Wed Dec 09 10:45:56 EST 2015 | huske
I've put down a SOT223, close enough to your 3pin transistor, in the same situation you have. The large pin was to be soldered on a large exposed ground plane in the corner of a board, over 2"x2" exposed area. We left the paste file as is, so where
Electronics Forum | Sat Dec 19 05:23:54 EST 2015 | padawanlinuxero
Hello thanks for the quick response actually both terminals are for a receptacle, both terminals has to have that solder bridge.
Electronics Forum | Wed Jan 13 15:47:57 EST 2016 | dyoungquist
What surface finish are you using on the bare PCBs? ENIG, Silver, OSP, Leadfree HASL, etc.?
