Electronics Forum: solder and height and vs and solder and volume (Page 1 of 1)

Volume and average height of solder paste after printing machine

Electronics Forum | Thu Oct 02 01:47:57 EDT 2008 | myleb

I'm new to SMT. Now, i'm making program for SPI machine to inscpect for solder paste of SP60-MU. I think this is a very good printer but some times, my program shows only 50-60% of volume transfer; and the average height is very high: nearly 200 pct.

Volume and average height of solder paste after printing machine

Electronics Forum | Thu Oct 02 12:22:26 EDT 2008 | JerryS

Hello Ok there is not much info here. What you have to mae sure of is several key factors. 1. Have you entered the correct stencil thickness. 2. Are you using the stencil gerber (not the paste layer) The paste layer is usually not adjusted for ap

Volume and average height of solder paste after printing machine

Electronics Forum | Thu Oct 02 17:00:44 EDT 2008 | davef

Is that accurate? If so, what are your aspect & area ratios? [Similar to the JerryS comment above.] * You say, � � and the average height is very high: nearly 200 pct.� => Our troop can make paste that height too. They snap the stencil-off a fast as

Solder Paste and fine pitch components

Electronics Forum | Wed Sep 18 12:31:16 EDT 2002 | dragonslayr

My suggestion is to conduct a Design For Manufacturing (DFM)study on the assembly in question. Pay particular attention to the pad sizes, component lead dimensions and satisfy yourself that those two factors are correct. Given that pads match compone

Re: Solder Paste and Stencil questions

Electronics Forum | Tue Oct 12 22:22:34 EDT 1999 | se

| Hi, | We are in the process of evaluate our solder paste,incoming inspection over the solder paste, stencil requirments: | | 1- Is anybody using/requiring 1000 Kcps or more on viscosity to your solder paste provider ? Why ?? | 2- Is anybody using

Re: Adhesive Dispenser Vs. Screen Printing Adhesives Pros and Cons

Electronics Forum | Thu Oct 12 22:16:59 EDT 2000 | Dreamsniper

Hi Guys, I'd like to share this to all of you...you can start playing with the rests...Stated prices, if not indicated, are in Aussie $ or Singapore $. Stencil Printing Adhesive Pros a) Less Capital Equipment Cost (Short Term). In reality it is f

Can anyone tell me that between Mirtek & Kohyoung which AOI machine will be better and why?

Electronics Forum | Mon Feb 16 12:33:58 EST 2015 | ianatvadatech

Hey Syed, I've been running the MV-9 for just over a year. We shopped around very extensively (two APEX shows) before switching from yestech to mirtec and we bought two of the best systems they had to cover the four lines we run. Two systems are fa

  1  

solder and height and vs and solder and volume searches for Companies, Equipment, Machines, Suppliers & Information