Electronics Forum: solder and pot (Page 1 of 201)

WSOL and solder pot

Electronics Forum | Wed Mar 12 12:28:52 EDT 2008 | operator

I recently witnessed a process in which the solder pot operator used Techspray WSOL water soluble masking to cover the areas around a connector that was to be soldered on the solder pot. He did not wait for the WSOL to cure. He soldered immediately.

WSOL and solder pot

Electronics Forum | Fri Mar 14 11:18:29 EDT 2008 | operator

The way it works is the liquid solder immediatley cures (or should I say burns) the WSOL where ever it touches it. This hardens and keeps it in place and protects whatever is under it. Some of the WSOL falls of in the pot. I am suprised that the burn

WSOL and solder pot

Electronics Forum | Thu Mar 13 09:43:13 EDT 2008 | jseagle

If the mask is not cured and is coming off in the pot I don't see how it is protecting anything. If you want to mask something fast you need to use tape not liquid mask that requires cure. My $.02.

WSOL and solder pot

Electronics Forum | Wed Mar 12 16:20:51 EDT 2008 | hussman

Poor training. Don't blame the operator, he was either shown this or left to his own devices. Be the better man and provide him a better process. Regular old peelabale solder mask would be a start.

WSOL and solder pot

Electronics Forum | Wed Mar 12 16:30:45 EDT 2008 | operator

I witnessed this at our sister company. It seems to be their standard process. It is not my place to interfere with their processes. I was just curious if there was any chance of brittle solder joints or other defects that might be caused from the WS

solder pot

Electronics Forum | Mon Dec 19 09:39:44 EST 2005 | 4rides

I find myself in possesion of a solder pot from a production machine that was sent to scrap. The scrap man was uninterested in the 2 ton pot. Does this thing have value ?? Or am I stuck with a hunk of Hasmat ???

solder pot

Electronics Forum | Mon Dec 19 09:45:19 EST 2005 | russ

Is it full of solder? If so, It has quite a bit of value.

solder pot

Electronics Forum | Mon Dec 19 10:11:19 EST 2005 | 4rides

Perhaps a TON in Washington DC

Selective moving pot vs fixed pot

Electronics Forum | Wed Jul 09 14:23:19 EDT 2008 | jwasyliw

Chunks, It sounds like you are referring to the construction of the solder pot. Not sure how that would require additional tooling cost? Thanks PCBHELP

Solder pot inspection

Electronics Forum | Thu Jan 12 17:42:55 EST 2012 | warwolf

yeah we are getting quotes on a new solder pot, we have used that paint we tested a small sample of it with solder and it seems to be ok, we are doing a full solder alloy change in about two months so we will have a chance to inspect the solder pot a

  1 2 3 4 5 6 7 8 9 10 Next

solder and pot searches for Companies, Equipment, Machines, Suppliers & Information