Electronics Forum | Thu Oct 02 17:54:46 EDT 2003 | davef
Yes, Russ IPC-6012A w A#1 - Qualification & Performance For Rigid Printed Boards talks to solder mask requirements in 3.8. One interpretation of what it says: * Solder resist [solder mask] must meet the qualification / conformance requirements of S
Electronics Forum | Wed Apr 07 09:54:32 EDT 2004 | Dreamsniper
Hi Guys, Can anyone help me in providing their experience in process related problems with regards to the above equipment? I noticed that it's slightly different with the wave soldering. Wave Process: Apply Flux, Pre-heat then Solder Selective Sol
Electronics Forum | Tue Aug 24 12:20:33 EDT 2004 | davef
The methods Terry mentioned are good, but our operators are too impatient. Here's how they do site prep, after removing the BGA: * Use a soldering iron to melt the solder at the base of the ball. * Flick the ball[s] from the pad[s] with the solderin
Electronics Forum | Fri Oct 08 08:28:27 EDT 2004 | davef
Wonder Solder [ TRT-Wonder.com ] is a proprietary silver solder. Some cynics might say Wonder Solder got its name because the people that started the firm wondered if anyone was crazy enough to pay that much for solder. Most audiophile silver solde
Electronics Forum | Tue Mar 15 12:20:47 EST 2005 | Material Man
The use of nitrogen in lead free wave solder operations is primarily used to reduce or even eliminate drossing of the solder, thus improving solder yield. The higher priced lead free solder makeup (Cu, Ag) make this a more economical proces than the
Electronics Forum | Sat Apr 30 00:28:46 EDT 2005 | thaqalain
I failed in a Soldering interview.My recruiter send me for PTH wave soldering. The company given me a small board and asked me to take out rectangular prismatic shape PTH components,I tried to put two guns around solder bonds one by one alongwith flu
Electronics Forum | Fri Dec 02 08:52:05 EST 2005 | pavel_murtishev
Good evening, I�ve just solved very similar soldering issue. In my case the problem was with 0603 chips. Solder joint had same appearance. I suspected that solder do not melted and increased TAL and peak temperature. No result. Next thing I tried to
Electronics Forum | Fri Dec 16 04:41:30 EST 2005 | tk380514
A day and half is a life time for our solder paste, Almit V14L... but then we dont have in-line solder paste printers, we have micro BGA stencil that wont work with anything but new solder paste, 0.8mm pitch and pad size is 0.3mm, stencil thickness
Electronics Forum | Mon Aug 21 10:58:34 EDT 2006 | davef
Pulsar Solder Saver: "The Solder Saver is a unique, handheld tool that scoops dross directly from the surface of the solder wave pot. The dross oxides are instantly separated from the solder using a unique high-speed rotary process system. The newly
Electronics Forum | Tue Jan 30 20:47:32 EST 2007 | davef
Inspection criteria [B Willis] Solder-paste application * Fine-pitch printing Satisfactory solder-paste should: ** Be aligned with all pads ** Conform to the stencil's pad-aperture size ** Have a smooth, flat void-free surface Acceptable solder paste
.png)
