Electronics Forum | Mon May 18 20:57:06 EDT 1998 | Earl Moon
.025" pitch so the only problem we run into is too much HASL on the adhesive side causing improper glue dispense. | As Earl keeps saying HASL thickness is hard to impossible to control. I think we need to look hard at OSP's again but then you get in
Electronics Forum | Mon May 18 22:54:04 EDT 1998 | Dave F
.025" pitch so the only problem we run into is too much HASL on the adhesive side causing improper glue dispense. | | As Earl keeps saying HASL thickness is hard to impossible to control. I think we need to look hard at OSP's again but then you get
Electronics Forum | Thu Apr 16 13:40:08 EDT 1998 | Chrys
| Is there anybody to help me ? | We have small balls appearing on the boards soldered by | wave soldering machine and it looks that use of nitrogen | is linked to the problem (because without nitrogen, we have no more | problems). | That remind you
Electronics Forum | Tue Apr 14 09:38:07 EDT 1998 | Earl Moon
| We are having some difficulty soldering a 240 pin Altera device. We use Alpha WS-609, a very generic profile for that solder paste, and a 6 mil stencil with laser cut apertures (1:1 ratio). This is a 20 mil pitch device (aperture size is 10 mils X
Electronics Forum | Wed Apr 08 05:41:37 EDT 1998 | Alan Pestell
We currently use the Loctite system of Glue/stencils and are getting very good results. You may still have a height problem is you solder resist is too thick. The UK sales person is Bob.goss@loctite-europe.com & he may give you more help. The only ot
Electronics Forum | Mon Mar 16 01:06:25 EST 1998 | Victor Ng
Dear all, Recently I have a problem of non-wetting at our wave soldering process. It appears only on the SMT pads for the chip components (at the solder side) of the HASL PCB. With all the same parameters on the wave soldering machine, i
Electronics Forum | Fri Mar 06 15:04:11 EST 1998 | Todd N
| We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. | 1) Do you need
Electronics Forum | Fri Mar 06 23:02:43 EST 1998 | Scott McKee
| | We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. | | 1) Do you
Electronics Forum | Thu Jan 15 17:07:18 EST 1998 | Graham Naisbitt
A reasonable assumption but it could be a reaction between your solder resist and the fluxes in the wave and reflow processes. The issue is, how will anyone really know? Then, are they likely to compromise circuit reliability? I have a method that wi
Electronics Forum | Tue Sep 25 12:50:13 EDT 2001 | mparker
Since you are mostly concerned about the flux and suspect an application issue, you need to do a few things to validate whats going on. 1. Forget about speed of processing, length of time to do the job. Focus on accuracy first, then speed. with that
winsouce.jpg)