Electronics Forum | Fri Jul 24 09:20:57 EDT 2009 | esolano
Any ideas, guys?
Electronics Forum | Thu Jul 23 09:59:11 EDT 2009 | esolano
Hi all, Zone 11 on a XPM2-1240 does not want to heat up and would not stay at set point. Does anyone have any ideas how to solve this problem? Or if you know of a technician in the Southern California area that can perhaps fix this problem, please
Electronics Forum | Tue Feb 07 08:07:18 EST 2006 | amol_kane
I am looking at both totech and McDry.....both are at par with features....McDry is marginally more expensive than Totech
Electronics Forum | Thu Jul 23 10:02:19 EDT 2009 | esolano
I forgot to mention that we've tried to change the resistor on it.
Electronics Forum | Fri Jul 24 10:08:05 EDT 2009 | jdengler
Possibly, if you want to sell used equipment you should have a competent technical staff! Jerry
Electronics Forum | Tue Jan 31 13:05:11 EST 2006 | james
Just want to know if it is ok to leave parts in the bag with an open end. I just hate for the operators to start leaving parts in the mcdry with just the tray. I could see them damaging them, label incorrectly or mixing them up. Just want to know
Electronics Forum | Fri Feb 03 02:04:16 EST 2006 | pavel_murtishev
Good morning James, It depends on MSD class. Refer to J-STD-033. When you open dry bag shelf life starts. You have to mount all devices before maximum allowable shelf life time exceeds. Storing in dry cabinet capable maintaining RH
Electronics Forum | Fri Feb 03 09:44:26 EST 2006 | amol_kane
Hi James, As far as i can see, if you reseal the bags, then storing in a dry cabinet would be unuseful (as the McDry will no longer be able to absorb moisture from the components, and the dry bag will only be as effective as the desiccant in it) i t
Electronics Forum | Tue Feb 07 05:40:16 EST 2006 | pavel_murtishev
Good day, J-STD-033A: 4.1.2.2 Moisture Sensitivity Levels 5-5a For moisture sensitivity Levels 5 and 5a with floor life exposure not greater than 8 hours, a minimum desiccating period of 10X the exposure time is required to dry the SMD packages en
Electronics Forum | Wed Jun 08 09:37:20 EDT 2005 | james
Ok here I go again. I got rid of the last problem but now I am back to a different problem. When the machine sits and I press Reset, the screen reads Starting the Z-axis Homing the Programmable squeeges and just stays there and does nothing. So I
.png)