Electronics Forum | Tue Jul 18 08:18:44 EDT 2017 | emeto
Sergey, we understand your dilemma very good. Still the key words in your post are "having a capable system" and this is not given with that old machine. You should probably research the Samsung Tsvetan is talking about - it has 4+1 placement heads
Electronics Forum | Mon Jun 19 09:53:27 EDT 2017 | tnisbet
Hi, Yes you can add a paste dispenser to the Quad 4C. The system will dispense DOTS and DOT patterns, no lines. We sell kits to add the dispenser. It takes about 4hours to install the kit. We also sell Camalot dispensers, benchtop & floor models. w
Electronics Forum | Thu Jul 13 02:30:29 EDT 2017 | jandon
We are using hot-plate. It is the safest method to rework aluminum substrate PCB's. http://www.martin-smt.de/en/rework/products/pre-heater-hotbeam.html "For efficient rework on heavy electrical systems with flat bottom surface and LED PCBs the pow
Electronics Forum | Fri Jun 30 15:18:24 EDT 2017 | aurash
If anyone has a KE-760 user manual that he/she can share with me please, I would really appreciate it. I do have a KE-750 manual but it doesn't cover VCS (video centering system) which is my main problem. Thanks in advance, Aurash
Electronics Forum | Thu Aug 17 06:02:37 EDT 2017 | smeissner
Is anyone using an AOI machine for through-hole > checking? We have a need to check post-build on > some PCBs', but there doesn't seem to be any > obvious AOI solution. > > Is there such a beast > available? Check Goepel. They developed a Spec
Electronics Forum | Fri Jul 28 12:13:38 EDT 2017 | dontfeedphils
Ironically enough, inline wash system belts work well for placing on top of small assemblies inside wash basket to avoid bouncing around like you've seen. This of course assumes you have access to an old belt like that. Point being, try to find som
Electronics Forum | Wed Oct 04 07:43:24 EDT 2017 | sukanyadg
Hi, So we are looking to automate a factory. We already have SMT assembly using robotic assembly line. Can anyone suggest or connect me to someone with technical expertise to implement this complete solution? We want to automate and also enhance th
Electronics Forum | Tue Mar 27 16:57:41 EDT 2018 | warwolf
You could try changing the SMC pneumatic cylinder? We had a few that needed them replaced, we would get a pick error from them and the part would not be presented in the tape pocket (as if the tape doesn't push far enough to click over the ratchet s
Electronics Forum | Sun Nov 26 09:41:00 EST 2017 | robertorocco
I nave a cp40c macchine but on the HD have a bad cluster the system operating win98 will no start. Can anyone help me About how to install the samsung control program? It possibile to copy this program from hold hard disk to new hard disk? Which nams
Electronics Forum | Wed Dec 13 08:54:28 EST 2017 | raymccomb
We have a DEK 265 and we have fitted new belts to it after one split in use. when we set back up and run program A all is OK, when we go to run program B it has System Error. Servo Following Error - Fatal Error - Reinitialise machine. Does any one h
