Electronics Forum | Wed Aug 07 09:05:11 EDT 2002 | davef
N2 PPM vs %RH? With a firm grasp of the obvious, reflow oven manufacturers rig N2 ovens differently than non-N2 ovens. The N2 displaces O2. Usually N2 oven monitor something or other to give an indication of N2 ppm. %RH really isn't part of the eq
Electronics Forum | Thu Aug 15 22:35:54 EDT 2002 | Brandon
I've done some experiments on baking parts as we got pop corning QFP's on our production line. This QFP has moisture level of 5 and I baked them @ 125'C for minimum of 12 hrs. So far results were great but I have a question: Forum says that I cannot
Electronics Forum | Tue Sep 03 18:14:35 EDT 2002 | fmonette
I have never heard about a requirement for temperature ramp-up for baking components at 125C. In general the concern for delamination with moisture sensitive components starts above 200C (peak body temp). Most important is you should bake your com
Electronics Forum | Mon Sep 23 03:12:01 EDT 2002 | surachai
We encounter this problem also , I know that it 's acceptable per IPC standard but sometime it fail at ICT and FCT , then this problem should be prevent , we found it with QFP 16 mil pitch and the defect looklike negative wetting at the front of lead
Electronics Forum | Sun Oct 13 22:19:28 EDT 2002 | mikestringer
Hi Everyone What lubricants do your maintenance people use for the chains in your Reflow ovens? The manuals for our ovens have one recommendation - but I am always open to other people�s experiences and recommendations. Another option may be easie
Electronics Forum | Wed Nov 06 10:31:30 EST 2002 | davef
First, from what you say, it's unclear that there is a "solderability" issue with your connectors. Different appearance of the soldered connection from one side of the connector to the other is what we're talking about [I think]. But it is curious.
Electronics Forum | Wed Nov 06 14:57:56 EST 2002 | rmorford
Nothing funny seems to happen to the connector when heated. I have no idea how to monitor the temperature of a good pad vs. a bad pad because I have no idea before reflow which ones will be good and which will be bad. I did take a board and rip the
Electronics Forum | Thu Nov 14 10:03:40 EST 2002 | davef
Doug, Ooooooooo. You're correct Vinny has to be talking about Rogers teflon boards. Vinny, There are many different types of PTFE based products. Generally speaking, PTFE has a melting point of 620degF and withstands solder reflow and HASL proce
Electronics Forum | Mon Nov 25 07:58:27 EST 2002 | Yannick
Hi, I made a board wich I plated with immersion Tin, I tought it should be the same result as we had with tin lead but we ran into a weird problem. WE use a 63/37 no clean paste and on the Board with Immersion Tin the solder just make a ball ON
Electronics Forum | Thu Nov 28 09:51:37 EST 2002 | davef
I got here before the experts did. Underwriters Laboratory Incorporated is an organization located in the United States and is purely concerned with product safety performance. UL operates laboratories for the investigation of materials, products,