Electronics Forum | Thu Nov 25 05:01:42 EST 2004 | RB
Something went wrong during the screening proces. So there are som tinlead splashes on the gold connectors. Can anyone give me a suggestion how to remove the tinlead splashes
Electronics Forum | Tue Nov 30 16:04:04 EST 2004 | fcox
When you say something went wrong in the screening process, do you mean that the paste is splashed (prior to reflow)?
Electronics Forum | Tue Nov 30 17:32:37 EST 2004 | russ
If you are lucky, you might be able to chip the solder off the fingers with an Exacto knife and then polish it up with a pink eraser. This does work if the solder on the fingers isn't wetted very well. Russ
Electronics Forum | Tue Nov 30 11:37:39 EST 2004 | fcox
Try contacting a company called Jalema. http://www.jalema.com They have a product line similar to what you're looking for.
Electronics Forum | Mon Nov 29 12:55:07 EST 2004 | bobsavenger
I would like to know if anyone has a generic Temp. chart for SMT components. I need to know the Max. temp. parts can withstand while going through the reflow or wave operations. Thanks Bob Leible Raven Industries
Electronics Forum | Mon Nov 29 18:54:30 EST 2004 | russ
IPC 782 has some info in it by package type. This is usually dictated by each component manufacturer. All SMT parts should be able to withstand 220 C for at least 60 sec. Russ
Electronics Forum | Mon Dec 06 00:44:45 EST 2004 | donb
You probably have already done this... but you need to enter the maintenance program with the maintenance key, select "Set Prefs" scroll down to "Upline Machine" and enter "Fuji".
Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel
I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long
Electronics Forum | Tue Dec 07 00:53:48 EST 2004 | donb
I think I have schematics for a Fuji loader here. Let me know if you want me to scan & email or fax some pages.
Electronics Forum | Mon Nov 29 23:11:53 EST 2004 | donb
Does anyone have instructions for calibration of a FUJI IP3? I have all the jigs & software etc. but no instructions. Any help would be appreciated, Thanks.