Electronics Forum | Sat Aug 21 05:43:35 EDT 2010 | rezai_k2005
I want setup a TV factory and need to know how much SMT equipment is need and which model is best and wht's their prices?
Electronics Forum | Sat Aug 21 13:12:04 EDT 2010 | dan_ems
That depends on the boards that need to be assembled, do you have a project something? would be much cheaper if you assemble these boards to a specialized company, our company can offer you good prices for SMT assembly.
Electronics Forum | Tue Aug 24 17:59:10 EDT 2010 | davef
A board support must be used to prevent bowing of the board during insertion of the sockets. It should have a flat surface with holes or a channel large enough to receive the sockets during installation. [Tyco AUGAT HOLTITE Socket Application Note 11
Electronics Forum | Mon Aug 23 17:43:18 EDT 2010 | davef
SAG: Questions on solder mask webbing with fine pitch parts are: * What is the minimum pitch that you can use webbing between fine pitch pads? * What solder mask do you use?
Electronics Forum | Wed Sep 01 08:05:28 EDT 2010 | sachu_70
Solder mask between pads in case of fine-pitched device footprint may not be a practical solution to implement. Cheers !!!
Electronics Forum | Fri Sep 10 08:23:34 EDT 2010 | duso02
We have done it before prior to conformal coating a customer's populated board with parylene. They had us do a sample first then conducted testing. No ill effects but it really comes down to the components installed and what they can handle. The surf
Electronics Forum | Sun Aug 22 07:41:45 EDT 2010 | shirkavand
Hello every body Does any body have any catalogue or data sheets for following part numbers. They are about SMT equipments and their manufacturer is Berotek. Any help would be appreciated. 1- 00310508-02 2- 00310509-02 3- 00310510-02
Electronics Forum | Sun Aug 29 19:02:15 EDT 2010 | jeffr
You must re-insall the software. Do you have the procedure and the disks? The yamaha manual quotes:- Ea12324 The repair detection of the file. The machine is unusually shut down. One or more files may be damaged. Run the upgrade installation of the
Electronics Forum | Tue Aug 24 10:07:22 EDT 2010 | davef
Solder mask misalignment: mismatch in registration between the solder mask and the features on the PCB. It when the things that are supposed to covered are not covered by the solder mask.
Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax
I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!
