Electronics Forum | Thu Jul 25 23:21:40 EDT 2013 | dekhead
1000ct encoder is the only one used on DEK Horizon (Typhoon Series); 2 different manufacturers, but interchangeable. http://www.dekhead.com
Electronics Forum | Sun Aug 04 19:42:50 EDT 2013 | starlogixs
Thanks for the reply Sarason. The software looks interesting, as we are a small manufacturer. However I do need the original Juki software for a calibration file. The X axis motor has been replaced but the calibration file is missing to teach and ca
Electronics Forum | Mon Aug 05 22:44:43 EDT 2013 | sarason
Sorry I can't help you with that , but there is one for sale at resurface. http://www.resurface.com.au/usedequipment.shtml Maybe they could send you a copy regards sarason
Electronics Forum | Tue Aug 27 05:02:13 EDT 2013 | danyquintard
I think it is useful just to see where varnish should not be (eg connection parts). it is necessary to use another method to measure the thickness.
Electronics Forum | Fri Aug 30 07:27:21 EDT 2013 | duso02
Contact the coating manufacturer to get their response. We use many different coatings every day and they all glow differently but that has no affect on the coating itself. As stated earlier, it's job is only as an inspection tool to identify where
Electronics Forum | Fri Jul 26 08:41:52 EDT 2013 | cyber_wolf
We are looking at buying a dedicated machine for cleaning misprints. Does anyone have any experience with Smart Sonic or the other manufacturers? Any feedback is appreciated. Thanks
Electronics Forum | Mon Jul 29 11:15:05 EDT 2013 | kjs123p
We used to scrape off the paste with a plastic putty knife and then place the boards in our Smart Sonic stencil cleaner that we used to clean the stencils in. It worked well.
Electronics Forum | Mon Jul 29 12:28:34 EDT 2013 | emeto
You can just get any ultrasonic bath - the ones they use for jewelry will work. Just get the right size based on your largest boards.
Electronics Forum | Mon Jul 29 09:43:31 EDT 2013 | cyber_wolf
First figure out which centering phase it is using when the part gets rejected. Then run the machine in step mode and watch whats going on.
Electronics Forum | Mon Jul 29 11:17:45 EDT 2013 | kjs123p
Is it failing the optical measurement or a vac measurement? I know that sometimes there is a dimple on the face which can cause rejects due to low vac. I am not sure about the MyData though.