Electronics Forum | Thu Mar 19 02:35:48 EDT 2020 | franknguyen
Hi, I got a new project, and need to provide customer the ICT (In-Circuit-Testing), FPT (Flying-Probe-Testing) process quotation. The new PCBA contains analog components, digital components, and some BGAs that can support Boundary Scan. Does anyone
Electronics Forum | Thu Mar 19 15:28:34 EDT 2020 | emeto
You are programing something wrong or your image is not in the center of the stencil. On DEK machines you can move a lot in Y by offseting the image in the program. In X machine can move +_5mm. Now, sometimes there is a way around this as well if yo
Electronics Forum | Thu Mar 19 16:13:28 EDT 2020 | stephendo
I tend to go by extending it by a distance rather than a per centage. For example 10 thou over. Does anyone else give a distance rather than a per centage? For long pads on connectors where I need more solder, a per cent doesn't make sense to me.
Electronics Forum | Fri Mar 20 13:00:14 EDT 2020 | dwl
I've done over printing for Pin in Past applications and you'd be surprised how much you can over print and still end up with an acceptable solder joint and no solder balls. As others pointed out, there are a lot of variables involved, so trial and
Electronics Forum | Thu Mar 19 11:43:13 EDT 2020 | kylehunter
Hey all. We have an assembleon Opal Xii. Does anyone have a copy of, or know where we could obtain a copy of the offline programming software? Having to do all setup on the machine is starting to become an awful and inefficient solution. I've asked a
Electronics Forum | Sun Mar 22 19:33:54 EDT 2020 | kylehunter
> THe Ealead software pretty much does everything > for $1000US, Its big weakness is its importing, > for this you use PCBSynergy. Have you tried the > Ealead demo it run's for a month.But it is > limited to 10 feeders sarason.
Electronics Forum | Mon Nov 23 12:34:31 EST 2020 | mihnea
Hi, I tried to find this software on the internet and after some days I ended up here. I'm a student and have access to an Assembleon machine and I need Cad2Cad for it. Can you please provide it for me at mihnea.horbuli@stud.etti.upb.ro Thank You.
Electronics Forum | Thu Mar 19 18:26:30 EDT 2020 | damiendigilin
We just brought a used TP11 having some problems the computer will no longer boot as the 25VDC+ line was reporting over voltage at 31+VDC If we hit enable 25VDC+ on the power unit card it blows the 38+VDC Fuse F8.
Electronics Forum | Thu Mar 19 21:06:19 EDT 2020 | sarason
In circumstances like these immediately switch off and remove your power supply , I often build a test harness because the damage to an expensive and unique machine is not woth the trouble of shotgun repair. Dead resistors in the voltage sense rail.
Electronics Forum | Wed Mar 25 14:46:08 EDT 2020 | stephendo
What about designators? Using gerbers to program a pnp machine was always a last resort to be done only after much complaining and begging for proper CAD data. Back in the day I used UniCAM to program a mydata. After getting it figured out it was eas
.png)