Electronics Forum | Fri Mar 06 10:43:32 EST 1998 | Alan Pestell
We have a double sided pcb that is surface mount on both sides. Now a Through Hole connector has been added. Appart from hand soldering does anyone have info. on reflow soldering the part. The connector is 0.1mm pitch, square legs. 1) Do you need to
Electronics Forum | Fri Oct 11 03:17:52 EDT 2002 | Adam
Guys I was wondering if anybody has some useful advice with regards to achieving 100% solder penetration on one pin of a through hole device which I believe is attached to a ground plane. All other pins on the through hole device are fine, Just this
Electronics Forum | Mon Oct 09 15:53:49 EDT 2006 | russ
We like to use the type thast solders onto board and only the top of it is snapped on, this way we can use equipment to place shield and remove shield when required for access to component. We also utilize a through hole shield but basically solder
Electronics Forum | Mon Oct 09 15:57:10 EDT 2006 | russ
We like to use the type thast solders onto board and only the top of it is snapped on, this way we can use equipment to place shield and remove shield when required for access to component. We also utilize a through hole shield but basically solder
Electronics Forum | Tue Jul 06 16:44:14 EDT 1999 | John Thorup
| Is anyone aware of some guidelines regarding through-hole in SMT pads? One of our designers wants to add through-hole leads in some SMT pads for an inductor. The size of the hole is 0.032 inches and takes-up approximately 25% of the pad area. Th
Electronics Forum | Fri Aug 04 11:04:27 EDT 2000 | John
We manufacture a mixed technology board, that uses a through hole "mini cap" with a 2.5 mm lead span. We have had several failures caused by solder wicking up through the plated through hole pcb and touching the can. This shorts out the capacitor.
Electronics Forum | Wed Aug 11 13:44:40 EDT 1999 | Paul Wareham
We are using a mixed technology process with mostly through-hole parts plus some SMT IC's on the component side and some passive SMT parts on the solder side. We do not have a proper wave soldering machine for doing solder side SMT (double wave or o
Electronics Forum | Fri Aug 13 07:18:19 EDT 1999 | Brian Conner
| We are using a mixed technology process with mostly through-hole parts plus some SMT IC's on the component side and some passive SMT parts on the solder side. We do not have a proper wave soldering machine for doing solder side SMT (double wave or
Electronics Forum | Tue Mar 23 02:36:38 EST 1999 | Bob Willis
| Are there many of you who are soldering through hole parts in your surface mount reflow oven? How repeatable is the process? Do you need to touch up a lot after reflow? We don't do long runs maybe 200, 300 boards max. Can you just screen print
Electronics Forum | Tue Apr 23 15:53:52 EDT 2002 | HAN PHAN
I'm researching the history of SMT. In particular, I'd like to get some general information on MILESTONE events like: FIRST IC COMPANY TO RELEASE IT, BOTH TO DEFENSE INDUSTRY & TO THE MASS MARKET. WHEN? WHICH COMPANIES & MARKETS (TELECOM, COMPUTE