Electronics Forum | Fri Oct 07 17:22:16 EDT 2011 | davef
Questions are: * Pressure? * Heating ramp? * Solder alloy? * Solder preform or paste reflow? [We have more, depending on your answer] * 0.5 mm is pretty tight. Talk about tooling holes and measures to prevent flexing of the assembly * In time, heat a
Electronics Forum | Thu Dec 15 16:38:50 EST 2011 | davef
Sixth, make sure you have a feedback loop. Through the course of fixing problems, make sure the "fix" is incorporated back into program generation. For example, if a part definition is made or fixed, make sure the new definition or fixed part defin
Electronics Forum | Fri Oct 28 04:14:18 EDT 2011 | kenmar
I have a loud humming noise coming from my MY12 X-Motor ( Like when a motor is not locked in and it hunts). This noise is not all the time but only sometimes especially with fine placement!! What can it be? I do not want to change the Motor to find o
Electronics Forum | Sat Oct 29 02:13:27 EDT 2011 | darrenj
Hi, We had a video-related problem and I had to shutdown the machine a few times un-expectedly. Now, the video seems to be fixed (bios config problem), but the machine boots up and says that the serial number is -1 which does not match the calibrati
Electronics Forum | Fri Nov 04 13:04:36 EDT 2011 | austinpeterman
I have come to the realization that the root of all of our coating issues stem from one source. We are unable to control the viscosity of our coating. I am ignorant on the subject. Is there a proven method to consistantly produce the identical vis
Electronics Forum | Thu Nov 03 12:27:28 EDT 2011 | emeto
Hi, As many times people sudgested here you call them to bring machine in and make a demo. This is one way to compare. Another way is you go to them. Get a board and a data for it(ask them what they need) and go to dealer or manufacturer. Then ask
Electronics Forum | Tue Dec 13 11:27:58 EST 2011 | ck_the_flip
Here's the scenario: PCB Plating: Lead free HASL, Sn100C Solder Paste used: Sn62 (regular tin/lead solder with 2% silver). Anyone see any issues with this? What are the process considerations? Anyone??? PS-9 times out of 10, I don't get answe
Electronics Forum | Wed Jan 11 06:29:47 EST 2012 | cbeneat
We have Vectorguard frames we've been using for about 6-8 months. We've seen no leakage on ours. The frame has written on it an operating pressure of 101.5-116.0 psi,our pressure is set a lot lower, 50-60 psi, as we also use another frame that can'
Electronics Forum | Thu Mar 01 09:09:04 EST 2012 | cbeneat
We bought two of the nozzles from count on tools. The jury is still out. The vacuum thick errors or the lights sticking at this time has dropped, I reduced the air for the vacuum break to a more reasonable level. There is still some work to do on
Electronics Forum | Thu Feb 16 14:01:06 EST 2012 | cobham1
Thank you for the information. Are these items downloadable or do I need to purchase software or hardware for the information. Also how can I move forward without spending millions on equipment and inspectors. I am all in favor of reviewing that part
winsouce.jpg)
.gif)
