Electronics Forum | Wed Oct 09 13:18:46 EDT 2019 | dwl
What is the advantage of dispensing dots over dispensing a line? I don't see any reason why dots wouldn't work. You might have to experiment a bit to dial in the right volume and spacing to get the desired end result, but it shouldn't be hard. Fisna
Electronics Forum | Wed Oct 16 10:51:35 EDT 2019 | radialvalve
Hi Joe, sorry for the delay in responding to your request, hope it's not too late. There are several questions to be answered before we can guide you to the best solution to meet your Thermal Gel Dispensing Needs. I would like the opportunity to disc
Electronics Forum | Sat Nov 09 19:35:25 EST 2019 | richardcargill
the issue is the calibration. What you set it for has to match what it actually reads or you get the error screen at the end of every pass. If you go into the maintenance menu ( using the key next to the system button ) you can check that the pressu
Electronics Forum | Wed Dec 04 18:10:07 EST 2019 | thunder
No they weren't added, never been serviced. The top legs don't have that hard wire exposed,just the bottom 2. It seems when the connection broke {bad solder failed from TV being turned on and off going from heat to cold ?} them jumper wires appear
Electronics Forum | Fri Dec 27 16:12:54 EST 2019 | anteiv
thank you for reply here is picture of the board https://imgur.com/a/i2MfFBw on the bottom are pins/components which height is about 3-4 mm from bottom of the board we had to increase distance of board from nozzle to make clearance and we increas
Electronics Forum | Wed Jan 15 10:31:55 EST 2020 | emeto
Having 10c thermal differential is a lot. Trying different paste might help - usually thermal expansion makes component detach from PCB, then joint is formed and solidified, then component goes back but is too late to form a joint. Cooling speed migh
Electronics Forum | Fri Feb 14 12:22:57 EST 2020 | etmpalletguy
OK, you can't glue, Pallet Guys pallets are out the door, dual line reflow prevents from any lower temp solder paste.... Do you have a 3D printer? Are there parts underneath the connector in question? Measure the PCB thickness, pint out a custom hold
Electronics Forum | Sun Mar 08 09:45:35 EDT 2020 | richardcargill
Blimey, You've done well ! apart from the monthly clean/regrease/calibrate placement we clean the cameras periodically ( build up of dust over time on the lens ), There may also be some air intake filters that will occasionally need a clean, but we
Electronics Forum | Sun Apr 19 12:54:39 EDT 2020 | davef
A-620G doesn't require 100% wetting to the thermal pad. It requires 100% wetting to the land in the end-joint area. The end joint is the portion of the solder connection that is at the top [or bottom] of the connection. Look at 7.1.3 Solder Joint A
Electronics Forum | Wed Jun 24 18:50:31 EDT 2020 | premkumar_haribabu
Dear experts, We are in stage to fix lapse or hold time between pre-bake to reflow process ( SMT ) for flex-rigid PCB, usually for flex pcb , we need to assemble as early as possible once after baking & if not , we can store in humidifier up to some
winsouce.jpg)
