Electronics Forum | Thu May 03 11:06:40 EDT 2007 | davef
Sami: Do you seek contacts for conveyor suppliers or what? Equipment Conveyor Bosch http://www.boschrexroth-us.com/country_units/america/united_states/en/index.jsp Equipment Conveyor FlexLink Systems, Inc. 6580 Snowdrift Rd Allentown PA 18106 610-
Electronics Forum | Tue Jul 10 11:49:20 EDT 2007 | samir
Parallelism tends to drift: �h After preventative maintenance �h From dross buildup or other obstruction clogging either wave Parallelism should at least be studied during the process characterization stage, so that you know your machine's process
Electronics Forum | Wed Oct 17 17:51:13 EDT 2007 | jmelson
Yes, mostly. The computer just has a setting for which size frame it is in (66, 84 or whatever). The bearing slider is almost certainly the same, too, although the rails are a different length. As best as I can tell, my 1306/20 (which is NOT a III
Electronics Forum | Tue Oct 16 17:55:39 EDT 2007 | jmelson
Geez, what a great company! Somebody paid them $100K for that machine, now you have to pay up front just to find out if they have a part IN STOCK???? That's pretty shocking! You may just have to take the bearing off the machine. I'd guess it is a
Electronics Forum | Mon Oct 22 10:35:54 EDT 2007 | mulder0990
We use Microsoft Access to track our feeders. I have made a system for the machine operators to tag the feeders when they run into problems. We seem to be having a lot of pitch issues. I am wokring on geting a calibration jig to solve that issue.
Electronics Forum | Sun Mar 16 02:40:21 EDT 2008 | operator
We have this machine. It is a dream when it is working. We purchased from a larger company in town. Their in house service guy was servicing it for us whenever we could get a hold of him. There is an issue with the camera track. High pitched wining/
Electronics Forum | Wed Jul 09 16:00:04 EDT 2008 | grics
Obviously you wouldnt perform the most difficult rework tasks till last... Sorry. I should have clarified. We rack our units to keep good units flowing and fall out are held for rework. The line never stops. Inspection is inline and it is the deci
Electronics Forum | Wed Jul 23 03:04:57 EDT 2008 | gfro
Hello, We are using a PCB with thickness 3.2mm 4 layer and lot of through hole via's of diameter 0.4mm. We specified our PCB vendor to do plugging. Now we have big problems, that after 1..4 weeks we measure a low resistance between track's/via's of
Electronics Forum | Tue Sep 23 13:08:26 EDT 2008 | slthomas
Put the new stuff in the back and pull from the front. A pass through from stores makes that a lot easier. Bar codes are a wonderful thing if you can get people to use them. Wand it into stores then wand it sequentially into production via a queue.
Electronics Forum | Thu Oct 30 22:29:58 EDT 2008 | davef
For most applications, a nice square [or rectangle] pad works just fine. Assemblers ship boat loads of boards with these every day. It's reasonable for tight decoupling capacitor requirement applications to use round or radiused pads for components
.gif)
