Electronics Forum | Tue Oct 18 17:38:03 EDT 2011 | enttec
Hi Thanks for the info, I'll try that. Can you tell me more about the NT conversion ? Our operators sometimes struggle with doing backups and such on the dos system Thanks
Electronics Forum | Thu Oct 20 10:29:45 EDT 2011 | babe7362000
Can anyone tell me what a Tactile 12-Hardware Limit Warning is on the MPM Up2500? I tried to reset the machine and it gets stuck on the Tactile. If anyone can help, I would appreciate it. Thanks
Electronics Forum | Sat Oct 29 14:33:34 EDT 2011 | tech1
Try swapping out the motor controller boards and see if the problem moves. More than likely it is the motor, coupling or the encoder. Some of the suggestions about reducing the acceleration in the package is a good idea but this will not provide a lo
Electronics Forum | Mon Oct 31 18:05:41 EDT 2011 | janz
Hi If you want to clear bare pcb try to visit teknek company website, they are making roller type cleaning machine. I used similar solution before with good results.
Electronics Forum | Wed Nov 09 09:27:44 EST 2011 | edmaya33
If you are using a Humiseal. try UV-40 gel which is about 20Kcps. it will dam your material from capillary flow. It should be applied prior to coating of your low viscous material.
Electronics Forum | Thu Nov 17 14:22:08 EST 2011 | davef
Maybe the fabricators of RAM chips will give you the design for a DDR3 circuit board. Why not? I would help fuel demand for their product. Try: * Samsung * Toshiba * AMD
Electronics Forum | Tue Nov 15 12:24:12 EST 2011 | nevercry14
Well try to run in idle n as soon as the mtu. Goes to pick up part on tray it goes down but when homing back in position doesnt flag sensor because position is off.so the sz sensor not bieng flaged. Any ideas
Electronics Forum | Tue Nov 15 15:40:52 EST 2011 | jdengler
Do you have any trays in the location you are trying to pick from? The Z axis should move until it detects the top of a tray. Without any trays it may not function correctly. Also some machines will need an empty tray below the tray you want to pi
Electronics Forum | Tue Nov 15 22:08:58 EST 2011 | nevercry14
Thats the odd part that i can zero set no problem just when i try to run idle the sz sensor ok when goes down but when it goes back up its not bieng retracted up so sensor stays off n eror acurs again any ideas.
Electronics Forum | Mon Dec 05 11:31:45 EST 2011 | andersenequipment
I have customers that use Isopropal alchohol in this process, try it. I have heard good things about it. would you be in the market for another one of those? Soponofier
