Electronics Forum | Tue Mar 01 14:47:07 EST 2005 | Alex
I've just went thru cleaning all nozzles and I saw some of them stuck up. The reason for mine is that they're on the way out, between lock and the exit notch. I tried to reinstall them with the spring "forcing" the nozzle clockwise. Sound weird but I
Electronics Forum | Thu Mar 03 11:10:20 EST 2005 | Dougs
I'm telling you i've bought the nozzles wound the wrong way and it helped, no more probs with nozzles sticking, i'd tried buying fuji nozzles, checked all my component heights, set Z0 properly, checked shaft heights, set up st1, etc etc but the new s
Electronics Forum | Thu Feb 17 15:14:27 EST 2005 | OverTheHill
Ah,ha,ha,ha,ha,ha.....Ah,ha,ha,ha You guys are killing me !!!!!!!!!!! Let's get serious folks. O. Tarango, Tarango, Tarango. Every once in a while the earth has been known to wobble on it's axis. You were probably trying to build a board during th
Electronics Forum | Sat Feb 26 09:29:25 EST 2005 | davef
Try: * Bliss Industries [ http://www.bliss-industries ]. Ken Bliss in an invenerate poster here, but he's probably just getting feet back on the ground after APEX. * Metro-style carts that an earlier poster mentioned. Here's another source: http://
Electronics Forum | Wed Mar 02 11:57:10 EST 2005 | Rob
Hi Dave, Thanks for the info, it will be helpful. Planning on trying it on a number of finishes, and have arranged for some samples of the adhesive - Loctite 3880 to start with. Have discovered something important already though - why not many peo
Electronics Forum | Thu Feb 24 11:07:04 EST 2005 | cisridn
I need information on where I can purchase Lead free solder paste and solder wire samples. I currently use SN63/PB37 no clean solder paste in a 35G tube and SN63/PB37 no clean solder wire for rework. I would like to try out some samples of Lead fr
Electronics Forum | Wed Mar 02 04:52:42 EST 2005 | GV
Cookson solder paste 256 seem to be a good and very active no clean solder paste. We have some good experience. We did not bother to evaluate oters since we have had good results with this solder paste. May be you can try. Most important is the reflo
Electronics Forum | Wed Mar 02 09:19:15 EST 2005 | Dilbert
You probably are aware of this, but somehow get the conditioning unit as close to the sensor as you can. It sounds like the problem is the "long twisted pair shielded cable". Try different means of shielding, connect the shield at the end that has
Electronics Forum | Mon Mar 07 11:20:10 EST 2005 | mrduckmann2000
Russ, I tried to get a screen for glue but the design engineer who laid this board out made up his own rules. The 0402 pads are to close for a proper dot size.....per the stencil house. That is why I am going the solder mask route. I would rather
Electronics Forum | Sun Mar 06 11:04:19 EST 2005 | jsk
Slot three will not recognize magazine. LED's are lit (green)when inserted into slot three. Magazine works in all other slots. Tried multiple magazines. All gave the same error. Error code = E-MIPR-1 unknown magazine type slot 3 No visible damage t
