Electronics Forum: universal and password (Page 1 of 12)

GSM2 Universal user name and password

Electronics Forum | Sat Oct 06 17:39:58 EDT 2012 | sonavc

I got GSM2 Universal at auction. the machine boot O.K. it asked to put user name and password to run the software. please any ideal to remove it or reinstall the software. ( I have NO Manual or software ) thanks

GSM2 Universal user name and password

Electronics Forum | Tue Oct 09 16:01:48 EDT 2012 | dilogic

Try this - boot machine to OS/2 and interrupt USOS startup procedure, go to USOS/CONFIG folder and rename PSWDUSER.CFG to something else, in case you will need it. Then copy the attached file and reboot.

GSM2 Universal user name and password

Electronics Forum | Fri Oct 26 13:43:54 EDT 2012 | whispell

Make sure your machine configuration is correct. You may have something assigned to the machine that is no longer there. For 24V check to make sure all of the E-stop jumpers are plugged in.

GSM2 Universal user name and password

Electronics Forum | Thu Oct 25 19:53:42 EDT 2012 | sonavc

Thank It worked without the user name and password.When I try to zero axis I have other error unable write to global memory 5008. My machine, when turn it on i don't see the power to the Digiplan 8 axis modular and no bright on 24VAC on at servo co

Picking and placing coils with a universal In-Line 7

Electronics Forum | Tue Jan 08 15:53:30 EST 2019 | emeto

From the datasheet

Picking and placing coils with a universal In-Line 7

Electronics Forum | Tue Jan 08 14:41:08 EST 2019 | jrogalski88

I am a fairly new technician with a rather large electronics assembly company. Its been an ongoing issue to pick and place small coils using our Universal SMT machines. Curious if any if the seasoned techs at smt.net have any recommendations as far a

Picking and placing coils with a universal In-Line 7

Electronics Forum | Tue Jan 08 16:43:04 EST 2019 | bane016

Try with "120F" type part number:48503503 or 1220 1240...reduce pick up speed...

Picking and placing coils with a universal In-Line 7

Electronics Forum | Thu Jan 24 09:50:59 EST 2019 | my3sons

We can handle this challenge. If you would like to get an RFQ on a custom nozzle, please complete our form: http://www.cotinc.com/nozzle/

Picking and placing coils with a universal In-Line 7

Electronics Forum | Wed Jan 09 05:21:07 EST 2019 | jrogalski88

I will try this, thank you! Out of curiosity what about an 0807?? currently using an 1140 but there's still issues with that. I'm almost wondering if maybe parts just aren't sitting flat in the pocket so I'm getting pick and visioning issues.

Picking and placing coils with a universal In-Line 7

Electronics Forum | Wed Jan 09 11:46:45 EST 2019 | bane016

Maybe you have to contact your machine support they can modify special nozzle for that component...i dont know what else you can try...or just contact your support and ask them what to do...we had a similar problem with LED diode on our machine..and

  1 2 3 4 5 6 7 8 9 10 Next

universal and password searches for Companies, Equipment, Machines, Suppliers & Information