Electronics Forum | Thu Feb 15 15:23:12 EST 2007 | bvdb
The IP-1 vision error is" "Processing Error" er 401F 4003 which the FIP-I Operating Manual says the cause is "The actual number of leads on the part exceeds the number of leads in the Part Data". I have checked and re-checked the part data, lead
Electronics Forum | Wed Feb 21 15:16:52 EST 2007 | wavemasterlarry
sure sounds like alot of over kill. You can get all the info you need by running your machine. Keep the dross cleamed outof it and replace the flux stone every so often and you shouldn't have any problems. Them fancy machines are no match for real
Electronics Forum | Wed Mar 14 00:34:46 EDT 2007 | pyramus
Hi Muhammad thanks for the reply. However, this is my current situation. We are currently using some BGA's with this kind of packaging BGA over BGA. I have verified solderability of the main BGA (below Bga the one w/c will be soldered to PCB) using
Electronics Forum | Fri Mar 16 11:21:18 EDT 2007 | cdsullivan
From various research I also found the HT500 series was/is being manufactured by Saint Gobain (part number M797). The product is still available through various distributors, though I imagine the quality issues will still be present. The quality issu
Electronics Forum | Wed Mar 14 07:30:14 EDT 2007 | davef
So, you toss whatever is on the stencil every 8 hours. Correct? How long has it been on the stencil? * If that particular paste has been on the stencil for 8 hours, we'd agree to toss it too. * If paste has been on the stencil for less than 8 hour
Electronics Forum | Tue Mar 13 08:04:28 EDT 2007 | Cmiller
We have used thousands of them with no problems. They will not aid in "connector retention" unless you have a shear force at exactly the right angle. This is an advertising joke. They will help with alignment of the connector. Open your holes up so t
Electronics Forum | Thu Mar 15 17:33:20 EDT 2007 | Darby
As you are new to this - start with lots of hair and slowly reduce. Start with one good person. Spend the money on someone who knows the process, can set it all up, (including air, power, alignment, calibration, programming, troubleshooting, stenc
Electronics Forum | Fri Mar 16 16:21:30 EDT 2007 | bvdb
Our 1989 Fuji IP1 seems to have developed a personality. The most recent behavior change is that it now stops occasionally and takes a short "break". This happens just before the nozzle Z axis goes down - just before picking a part or just before
Electronics Forum | Fri Mar 23 02:22:13 EDT 2007 | bvdb
Latest information: The IP-1 packed up completely this week showing an assortment of weird error messages. The CPU was still running but the +24VDC power supply LED was off and nothing would work (emergency stop mode always enabled). Pulling the +
Electronics Forum | Mon Mar 19 17:09:38 EDT 2007 | jmelson
A binocular microscope gives just a little more info than the video would, as you have views from two slightly different angles. A good stereo microscope gives more resolution or sharpness than video can. You have to take the time to set up the eye
