Electronics Forum | Fri Jul 29 13:42:38 EDT 2016 | gregp
The standard you need is EIA-481B. It details the taping of components from 8mm tape up to 200mm tape including component orientations. 8, 12, 16 and 24mm tape has the sprocket holes only on one side so it is easy to determine the proper orientatio
Electronics Forum | Thu Sep 08 15:22:32 EDT 2016 | bobpan
If its a tall part and you are trying to scan it lower than 200 or so...you can have this problem (limit error). Thinking of things to look at.....Is your z-rod spring sticking? Push up on it and it should spring back with NO hesitation...if it does.
Electronics Forum | Fri Sep 09 11:09:16 EDT 2016 | capse
Full disclosure; I represent ASYS in the southeastern US. Depending on PCB size and mark requirements you can get a laser marker for under $100,000. It can be set up as an island to mark batches of PCB prior to them going to the assembly line. ASYS a
Electronics Forum | Tue Sep 13 10:00:27 EDT 2016 | awhite
Switched out the mech. relay on the board loader, no change. Same behavior. Could not find a mech. relay on the printer... SMEMA wiring appears go directly to a PCB. And it is at that point that I run out of talent. If the machine weren't dedicate
Electronics Forum | Wed Oct 12 02:44:38 EDT 2016 | bukas
hello, I have a problem with CP45FV Neo swing mirror. The mirror it self works fine, manually controlled it moves to correct position and back. While working it also moves properly but when machine is about to check for nozzle existence at the end of
Electronics Forum | Tue Mar 07 09:35:55 EST 2017 | buckcho
hello, I have a problem with CP45FV Neo swing > mirror. The mirror it self works fine, manually > controlled it moves to correct position and back. > While working it also moves properly but when > machine is about to check for nozzle existence a
Electronics Forum | Mon Oct 17 13:02:28 EDT 2016 | tdemon69
i have a MPM2000 now giving me 0 - hardware limit warnings..let me start off by saying that is was giving me x axis limit problems, so i replaced the x card with diff card. set all the switch and jumpers to x card , then i got 0- hardware . so then
Electronics Forum | Wed Nov 30 15:04:22 EST 2016 | warwolf
We have two of them set up in our line they where made in 2011. we place Atmel AT91SAM9G45-CU 324-ball BGA no issues and other larger PCB blutooth IC's,QFN,QFP full range of sizes. You can make your own profiles for the parts to be recognised if you
Electronics Forum | Sat Nov 19 03:26:08 EST 2016 | sarason
Have you tried running your image under a Virtual machine. From this you may be able to work out the requirements of the original machine, and so have some parameters to port the image forward on a faster PC, like say a pentium or Pentium III while s
Electronics Forum | Mon Dec 12 15:27:21 EST 2016 | marcpeo
Hello Sr. Tech, please disregard the board temp. > it should be the actual value displayed, the PV > at 145 deg. while the SP @ 140deg. > Hello Sr. Tech, please disregard the board temp. > it should be the actual value displayed, the PV > at 14
