Electronics Forum | Fri Oct 12 01:50:51 EDT 2018 | robl
We have a pair of old 22XDL's that are just used for heritage boards, and they do a good job. They have 5MP cameras in them same as the MV3L's. We had MV3Ls and MV5's at a previous place and got similar results. The key is understanding properly h
Electronics Forum | Wed Oct 24 07:28:36 EDT 2018 | tech1
It will in a limited fashion. It is a scanner and when using it for solder or lead inspection you will probably get many false calls, Operators tend to fall asleep clicking "accept" all the time. Don't get me wrong, we run one of these systems and it
Electronics Forum | Tue Oct 16 10:06:41 EDT 2018 | emeto
Hello experts, I have an assembly that goes through pretty tough sterilization on regular basis. Currently I am using a two component material in potting process. I was wondering if you can help me with material that can handle high temp and humidit
Electronics Forum | Sun Oct 21 22:05:01 EDT 2018 | srini1904
Hello, We have Dek 248 Icon i2 semi auto screen printer. This machine was not in use for long time and Bios battery was dead. We replaced Bios battery and now date are correct. Issue is its not communicating to control board. Suspecting Bios setti
Electronics Forum | Tue Oct 30 06:09:15 EDT 2018 | directx995
It's prob better to ask them which machines they use, since you have a few extenstion for only 1 machine manifacturer. Also, it may be a CAD file and you have A LOT of different CAD extensions, so I think it's better to make it clear with that EMS co
Electronics Forum | Fri Nov 02 19:22:01 EDT 2018 | sarason
The easiest way to do this would be to just put your ERP Online behind a password. Worry about writing a more complex system later. Access is no longer supported by Microsoft but the JET 2.0 format is still used a lot in Database sytems that started
Electronics Forum | Tue Nov 06 08:26:54 EST 2018 | bandjwet
We are considering a tabletop AOI primarily for rework purposes. In 95% of the cases we would NOT have centroid data NOR Gerbers, The area we would inspect would be in and around the BGA, QFN or LGA being replaced. In addition we would want o inspe
Electronics Forum | Tue Nov 06 08:57:39 EST 2018 | spoiltforchoice
Would an inspection scope like a Tagarno not make more sense? (Or possibly even a 3D one). If you have no data or golden sample to feed an AOI I'm not sure its going to be a whole lot of use and you are only interested in one specific area
Electronics Forum | Tue Dec 04 02:58:44 EST 2018 | robl
I would guess then that it is either variation in paste volume (unless you are using an inline SPI), or potentially a damaged chain or sprocket causing a small jump. The second one is easy as you can watch the chain do a full rotation, the first a b
Electronics Forum | Thu Dec 06 09:24:10 EST 2018 | ameenullakhan
Hi Rob, We used different Reflow Oven and noticed the component drop is less 1 out of 24 components. But not able to analyze, why its falling more in other reflow oven. Our maintenance team is assuring there is no vibration in any of the oven. And