Electronics Forum | Fri Nov 11 13:52:05 EST 2011 | SheanDalton
What is the size of the low standoff components you find trace wash effluent? and, what is the gap from the board to the underside of the component? If your component has a very low standoff, and/or, a wide footprint, you may want to consider findi
Electronics Forum | Tue Jan 17 23:25:55 EST 2012 | ngineer
I think I've got it. 1. Black flat connectors are for the nozzle changers, and whether or not the tab is pushed in or out (depending on whether they are placed in front of one of the blocks on the feeder base doesn't matter at all, the blocks are th
Electronics Forum | Sun Jan 20 17:47:41 EST 2013 | ngineer
Bobpan, It's been a while, and I haven't really had a need for this (simple boards, with larger components), but now I'm back to a board that needs this. I only have options for HOLD, PASS or VISION under transport in the Sequence Programming.
Electronics Forum | Mon Jan 21 08:26:45 EST 2013 | ngineer
Bobpan, Thanks for the reply. I have been using Tep Vision, I'll see whether I was using GOTO 1 or 0, it may have been 0. I am running from central controller, and am doing a download database from the database utilities when making changes on
Electronics Forum | Wed Mar 21 06:01:07 EDT 2012 | hunzo
Hello Sergey, I have used Kirsten Modula Wave with ADL (anti dross liquid) option. We have had the same expectation like you: less dross and lower operation cost due to no inert gas is required. That is achieved, the dross generation was modest and t
Electronics Forum | Thu Apr 19 20:01:30 EDT 2012 | eadthem
some things to consider, Is there flux on the board. are there finger prints on the tops of parts. Is the board warped at the V score from reflow Is the board shifting in the machine during inspection. These are the issues we have had with our mir
Electronics Forum | Wed Apr 11 00:40:19 EDT 2012 | ngineer
I have a problem setting up the LAE on my Quad 4c. I set it up for 0805, and it seems to work, although it rejects a lot of parts, at least it places "most" of them. I tried setting up on a soic14, and could not get even one to pass. I believe I h
Electronics Forum | Tue Apr 24 09:30:43 EDT 2012 | bdamico
Hello Laritzstange, My name is Brian D'Amico, I am the president of MIRTEC USA. I noticed your posting on this forum and I would like to offer some guidance. First, I would like to ask which system you have. Our MV-7 system is an in-line system.
Electronics Forum | Thu Aug 09 07:53:16 EDT 2012 | davef
Allowable bow & twist: Together, both IPC-A-600G and IPC-6012B represent the core IPC documents for describing the acceptable and nonconforming conditions that are either externally or internally visible on finished printed boards. IPC-A-600G relies
Electronics Forum | Sun Sep 09 02:24:04 EDT 2012 | audere
More lube on the O-Rings caused lots of problems. Nozzles would drop downward at times. So I pulled everything out and started from scratch. Testing 3 new Z-Rods, 4 used Z-Rods in good shape (replaced the O-Rings) and around 20 nozzles - the proces