Electronics Forum | Fri Aug 28 19:15:13 EDT 2009 | edmentzer
Have you used the EXCEL MACRO that MYDATA used to give out at no cost? We have been using the MACRO for 9 years and it is very good. Contact me if you are interested in the EXCEL MACRO. I can usualy edit the pick and place data with macro for a bo
Electronics Forum | Wed Jun 29 14:27:07 EDT 2011 | wrongway
Hello all I have used a couple of types one of them only clamped on two sides and you used a wrench and screwed the bolt down till it was tight ( what is tight) and there was no fram at all around the stencil so people got cut. the second one we us
Electronics Forum | Thu Jul 28 07:23:24 EDT 2011 | scottp
My group supports a couple hundred lines all over the world. Most of them use squeegees but a few use either the MPM Rheometric pump heads or the DEK Proflow heads. I absolutely hate the enclosed heads. Flux separation, compaction, and the print q
Electronics Forum | Mon Oct 14 10:53:28 EDT 2013 | emeto
0.5 if you use electroformed stencil or > 0.8 if you use laser cut. 2. Always use fresh paste 3. Uses the right printer parameters for your paste(for example Alpha likes fast release of the stencil from the board - in DEK this is called separation s
Electronics Forum | Fri Mar 13 17:17:07 EDT 2015 | tombstonesmt
Hello everyone, Has anyone had success dispensing ammoniated latex masking using a valve? If so, what company and type of valve are you using? Our current supplier of non-ammoniated latex masking will no longer provide a container larger than an 8 o
Electronics Forum | Mon May 09 12:55:58 EDT 2016 | rgduval
What kind of epoxy do you guys use for repairing PCB pads? We've been using the stuff you can get from CircuitMedic, but, it's rather expensive, and is usually one-time-use (as you don't use a whole lot of it). It's a two-part epoxy, so, once you'v
Electronics Forum | Tue Jul 05 18:24:50 EDT 2016 | padawanlinuxero
Hi have you try to use some type of adhesive like loctite or a solder mask to avoid lifted components, we use both in 2 different products, we use loctite to avoid a hall inserted in a plastic carrier, lift when being solder in the solder wave, the s
Electronics Forum | Thu Jun 09 16:44:20 EDT 2022 | SMTA-68235204
We currently are using the HIPPO system. It is a nice program. It's cloud based so nothing is stored on sight. This was helpful when my computer crashed. You can add an immense amount of information into the system. If you can think it you can enter
Electronics Forum | Thu Sep 06 10:55:37 EDT 2001 | davef
saturation occurs at ppm levels. Remember, IPA is extremely flammable and its bulk use makes the plant liable to all sorts of quite repressive safety rules/regulations and so on. Ignoring these rules exposes the owner to fines and possible plant cl
Electronics Forum | Wed Apr 21 12:03:59 EDT 1999 | Michael N.
I'm having problems with trying to get a good solder joint using a Ceramic PCB. We are using AMTECH hi-temp solder (ws-486 96.5/3.5ag). My profile looks great and I used the recommended profile from Amtech with a few adjustments. My max temp is about