Electronics Forum | Fri Apr 27 10:33:58 EDT 2007 | ck_the_flip
Jeremy, well said! Thanks for "validating" my theory... LOL I agree that the sampling frequency, AND methodology are key things with 3D inspection. 3D will give you some insight onto how your paste (rheology, viscosity, thixotropy)AND process are
Electronics Forum | Wed Sep 01 23:01:36 EDT 1999 | JAX
| Does anyone know of a site on the Web where machine programmers can discuss issues related to their job? | Doug, There is plenty of programmers on this site to deal with problems. If you have a question, Go ahead and post it. By using t
Electronics Forum | Wed Mar 08 23:40:43 EST 2006 | fastek
If......... 1) Assuming you are panelizing them (you would have to actually).... 2) You don't have any fine pitch parts on the board then I would suggest a chipshooter like a Fuji CP-6 or a Panasonic MV2F. Get (2) of these used for around $100K ea
Electronics Forum | Mon Jun 17 15:25:10 EDT 2002 | lysik
I would look at Universal for sure. They have a ton of late model Chip placer's and GSM's that they will discount heavy. There are so many used GSM's and HSP's on the market you could probably get what you need for a fraction of the cost. You could p
Electronics Forum | Fri Nov 11 09:41:12 EST 2005 | Eric C
Thanks for all your inputs. As I read through your responses, and through my research on the web, I have learned there are so many options to try and evaluate. The material we are using is loctite FP4531 - a snap cure flip chip underfill. Loctite ha
Electronics Forum | Fri May 18 07:38:25 EDT 2007 | realchunks
Hi Bart, I would suggest MyData. They are good for protos because they are very flexible. You can use strips of parts with no leaders. This is huge unless your customer / company deals with nothing but full reels. You can even teach it to pick u
Electronics Forum | Tue Oct 31 19:28:24 EDT 2023 | ttheis
We built our own coating system by mounting a Universal Robots UR5 to an edge conveyor between a magazine unloader and magazine loader. The robot has a needle dispenser on the head. We chose a needle dispense process to avoid aerosols and complex ven
Electronics Forum | Fri Apr 27 11:24:53 EDT 2007 | realchunks
Hi Steve-O, Good question(s). This process was set-up by an engineer that had a PhD in statistics, took him a year to develop and then thru it over the wall at us. The biggest problem we saw was SPC to measure solder volume. SPC is good for measu
Electronics Forum | Thu Dec 28 22:00:45 EST 2006 | Sue Kim
Hi all, I am doing some research on SMT machines. I would like as many people as possible to rate the following machines 1-6. The number 1 would be the best, number 6, the least desirable of the 6. I realize that there are dozens of factors to con
Electronics Forum | Wed Oct 10 13:35:00 EDT 2001 | stepheno
I used to work with Chris. (neither of us are there anymore). What is he talking about is putting components into "pockets". The parts would come in, in sticks (tubes) but we wanted them in reels. At first we sent them out to be reeled, but that w