Electronics Forum | Wed Jun 21 04:11:31 EDT 2006 | daxman
Are you familar with using the mecca mode on Fuji machines? There is a procedure I can take you through that will check the servo amp and allow you to adjust it. Is your machine useable at all? can you get it to pass zero set? If you can, view your s
Electronics Forum | Wed Jun 21 09:21:37 EDT 2006 | don dawson
I've been building boards for a long time and have never heard of anyone using electrolytic silver. Immersion silver would be 8-18 microinches thick. Plated silver would be significantly thicker (min a couple tenths - .0002" and up). So you may be ab
Electronics Forum | Fri Jan 19 20:49:41 EST 2007 | Greg Ross
If you are using these "keycards" as a visual inspection aid for performing First Article Inspection or in Process inspection of SMT populated PCBs then you should consider an automated system which is optical scanner based. They are inexpensive comp
Electronics Forum | Fri Jul 07 02:20:03 EDT 2006 | AR
Hi Yes, this is the only component with Ag/Pd finish. I found that by applying a copious amount of solder on the pad (we are using a dispenser) the component will be soldered. Although most of the solder coalesces on the terminations of the componen
Electronics Forum | Wed Jul 05 11:44:04 EDT 2006 | Rob
We had one mechanical engineer from a certain customer telling us we had to crop components leads so they didn't protrude through the board, as they could then come in contact with the case as the board was flush. Had I have known then what I know
Electronics Forum | Wed Jul 05 16:26:51 EDT 2006 | flipit
I had one SMT process engineer using rubber bands to hold a connector on second side reflow. Even the operators told him he was nuts. The zero stick through on leaded devices has come up several times for me. We clip leads first and pin in paste t
Electronics Forum | Thu Jul 06 13:29:42 EDT 2006 | Chunks
Unfortunately it's not what you know, but who you know. Sounds like it in your case. Tread lightly as this guy may become your boss. It happened to me. New guy comes in, couldn't tell the "red stuff" from the "gray stuff" (adhesive / paste in cas
Electronics Forum | Mon Jul 17 08:49:02 EDT 2006 | russ
Hi Paul, not to throw a wrench in here but I beleive that paople are talking about switching from SAC in wave to SN100C, NOT SACx, these are different. and should not be confused. SACx is supposed to fall somewhere in the middle of the SN100C and t
Electronics Forum | Mon Jul 10 16:24:33 EDT 2006 | nitro
I am looking at two stencil cleaners, and need some input. Electrovert Aquajet 2000 and EMC 30 Reliant. I am told that these are both spray type cleaners. My only experience with stencil cleaners is a PMR Ultrasonic unit which works well for the no c
Electronics Forum | Wed Jul 12 18:25:23 EDT 2006 | George
Hi everybody: I really need your expertise on this one. I was told that the flux 270WR from AIM is either No-clean or WS soluble depending on your needs. I read the TDS and it looks like it is....but..... Is there anybody out there using this or s
We are a global electronics manufacturing Solutions provider ....Our company supplies new and used SMT equipment, spare parts, consumibles, ESD supplies and services to a wide range of EMS companies.
Equipment Dealer / Broker / Auctions
Parque Industrial Nogales No. 5297 Zapopan
Jalisco, Mexico
Phone: 523316044491