Electronics Forum | Sun Feb 15 16:57:11 EST 2009 | p4qmtto
Hi. We had a similar trouble in a same oven's model. In each one of the heat zones, you have a thermal sensor to avoid an over heat. All of them are conected in a serial circuit with the coil of the main contactor for the preheaters power. If anyone
Electronics Forum | Fri Feb 13 09:36:58 EST 2009 | jlbelectronics
Hi, I have a Versatronics RV1 pacer with 7 feeders and camera system. The camera function seems to have stopped working. The compostite output from the camera is working anf the cable has beend chekced. The PC frame grabber card is manufactured by A
Electronics Forum | Fri Feb 13 13:28:12 EST 2009 | ccross
Need some help here. Our RS-1 Rework Station that we purchased with our AOI system crashed. Agilent is no longer supporting this product. We have not been able to recover a driver for the video card or the opto board in the system. These should be *.
Electronics Forum | Tue Feb 17 09:23:52 EST 2009 | patrickbruneel
We spoke so many times about recycling electronics being the correct way to avoid potential dangerous materials reaching a landfill. Well here it is Best Buy is implementing a recycling program without it being a law and for free. I find this remark
Electronics Forum | Tue Feb 17 11:02:13 EST 2009 | patrickbruneel
This is a sad story but has a rather easy solution. 21st century toxins need to be recycled in 21st century facilities and not in a 17th century environment such as that village in china. The lead in the electronics they recycle is not the biggest pr
Electronics Forum | Tue Feb 17 13:54:26 EST 2009 | snsmt
Hello All, I am trying to find some answers regarding acceptability of a RJ-11 Connector (phone jack). We have just received thousands of these connectors in and some of the gold plate contacts show some discoloration. The contacts are pink. I was w
Electronics Forum | Tue Feb 17 22:49:14 EST 2009 | davef
Try: acrylic adhesive Klapton tape [google for a source] It too is more expensive than the silicone adhesive tape. So, your buyer will keep trying to sneak the cheapo stuff in on you. We had to write a procurement specification and they still wont q
Electronics Forum | Thu Feb 19 07:17:35 EST 2009 | mdavister
When I had to order ceramic (AL2O3, BeO, AlN) in the past, the fabricator always used a CO2 laser system for cutting holes and irregularities in the ceramic. Some companies that I have used that do ceramic cutting are: http://www.altinc.com/ http:/
Electronics Forum | Mon Feb 23 05:37:23 EST 2009 | emmanueldavid
Necoleta, PWB Blistering/De-lamination may not be due for Titanium finished threads / holders which is typically being used to draw high Shelf Life of Pallets and even flow across Auto Wave Soldering rails. There is also nothing to suspect on Liquid
Electronics Forum | Tue Feb 24 18:33:59 EST 2009 | gregoryyork
It is probably due to the solder mask being undercured and is porous alowing the flux to be absorbed which boils when it hits the solder wave that kills the adhesion. You should be seeing this only over copper traces/tracks. Reduce flux volume and in