Electronics Forum | Thu Apr 11 16:23:20 EDT 2024 | cyber_wolf
I have been in the arena with both new and used. The 10 plus year old Juki's are solid machines unless someone neglected PM's. However...if something breaks and you can't repair yourself or source to third party, Juki will stick it to you. They ma
Electronics Forum | Fri Apr 26 08:20:51 EDT 2024 | radek
Hello, We recently acquired a used Viscom S6056 DS1W machine which is currently not operational. The initialization fails and we are encountering a repeated error: "D0, Vtrans command invalid." This error is also appearing with codes D4, D5, and D6.
Electronics Forum | Fri May 10 01:30:15 EDT 2024 | nicholascarson
Access the Calibration Screen: Navigate to the system settings menu on the HMI and find the calibration option. This may require entering a password or accessing a service mode, depending on the machine's security settings. Begin Calibration: Once
Electronics Forum | Sat May 18 02:20:15 EDT 2024 | SMTA-64387138
If I have more than 1 X-out on a panel I set it aside for use as a setup piece or for training. If that's all we have and I need a couple more boards to meet an order I'll inspect the bare panel myself and go from there. We get a great price on board
Electronics Forum | Tue May 21 13:35:36 EDT 2024 | wippsen
7.45 to 7.46 --> 7.46 to 7.47 and so on. Please read the following sentence from Viscom support: "These release notes were created to the best of our knowledge to include the new features and present the associated customer benefits. We would like
Electronics Forum | Sun May 19 16:54:48 EDT 2024 | wijim
FAB 3000 - This software offers a comprehensive suite of tools for Gerber editing, panelization, and DFM verification. It's designed to be user-friendly and includes features for SMT stencil pad creation, advanced DRC/DFM checks, and more. Cadence Al
Electronics Forum | Wed May 29 07:41:33 EDT 2024 | tommy_magyar
We use the same component on many different products, never faced a similar issue. However, things I would check are: - stencil thickness (ideally 125um) - additional Z move on the parts around the relay (as suggested by kumarb) - check the packages
Electronics Forum | Fri Jun 07 14:05:39 EDT 2024 | davidk
I wanted to open a discussion and ask about opinion: What is a normal result of the inspection of an AOI? How many falls calls per component /opportunity is bad/normal/good? How many defects per component/opportunity is bad/normal/good? What is goo
Electronics Forum | Wed Jul 03 06:49:19 EDT 2024 | dave0271
> We use both the ct930 and 1040, we are not > impressed, we ended up retrofitting due to > excessive heat being produced at the circuit > breaker side of oven, Ended up installing several > door fans to reduce the heat. also the o
Electronics Forum | Wed Jul 03 15:14:18 EDT 2024 | SMTA-74487602
I'm hoping to hear what others are doing regarding "recycling" paste. By recycling paste, I'm referring to an operator taking the paste left over on a stencil after a work order is done and putting it either back into the jar it came from originall