Electronics Forum | Mon Nov 21 06:49:57 EST 2005 | pjc
Go to this link for a nice tool for wave solder process troubleshooting: http://www.speedlinetech.com/news_publications/application-notes.aspx?OnId=5 Look for "Wave Solder Troubleshooting Wizard" If you have an Electrovert machine, contact applica
Electronics Forum | Fri Nov 18 12:00:06 EST 2005 | rlackey
Hi Lawrence, I would agree with that in the main, however in some cases some machines can be almost "timeless". We don't go below 0402 (1005), missplacements are negligable, and a actual placement rate typically hitting 28-30K an hour makes "upgrad
Electronics Forum | Fri Nov 18 21:40:41 EST 2005 | mika
We had some experience that some of our old machines went over 10 years. In this case the machines became to be obsolete. The machine manufactories in most cases, is only required to handle spare parts during this period of time. This is what I am be
Electronics Forum | Fri Nov 18 12:30:58 EST 2005 | Kokofiko
Hello, 1. I have DC engine of car's wishers with I use in at my project. the Engine specification is 12V DC 1.5A. The input voltage is constat of 12V. The problem with adding resistor ( in order to pull down the current)in the circuit is that resist
Electronics Forum | Fri Dec 02 12:34:53 EST 2005 | Kokofiko
Hello, 1st of all thank you. 2. While I was reducing the rottor speed, I've noticed that the engine don't stop immidietly when I disconnect the voltage source. That makes me problem how to control what is the rottor location-How can I fix it up? 3. I
Electronics Forum | Tue Nov 22 10:37:48 EST 2005 | haviland
Steve--Depends on the number of sku's they're talking about. Consider a small vertical enclosed carousel that will hold the small 6" AKRO (or equal) plastic bins. Push a button & the machine rotates the shelf. Parts are extracted manually. Foot print
Electronics Forum | Tue Nov 22 08:11:36 EST 2005 | davef
It sounds like you're exhausing your flux activity on this component proir to reflow. We'd start with the reflow recipe suggested by your paste supplier. If the component lead doesn't flow well try: * Raising the peak temperature in 5*C increments.
Electronics Forum | Wed Nov 23 00:22:30 EST 2005 | mskler
Thanx for your only reply!! I already increased temprature now its actualy on board is 240*c. I would like to discuss one more thing if I go for lead free solder paste & using some components wich are not lead free then what will be the result. Has a
Electronics Forum | Wed Nov 23 17:33:23 EST 2005 | adlsmt
Are the components 100% tin plated? Thats what we are buying and we have no problem at all soldering with the same profiles we always have used and we use the same alloy as you but different mfg. We have not had problems soldering tin plated parts wi
Electronics Forum | Mon Nov 21 11:44:43 EST 2005 | Guenther
We are running this reflow oven and are trying to get up to speed to meet RoHS. WE are having an issue with zone 9 coming up to temps. Does anyone know where we might get service or parts for this old oven? I have not found any information for this o