Electronics Forum | Fri Dec 09 18:35:01 EST 2011 | ngotranbestek
I have Oven Heller 1912EXL. I bought it is used machine ago 6 month Do anybody have experience about it? - How many speed Rail? - How many Zone need set, (10 zone or 11 or 12 zone need set?) - How is 3 cooling zone? need set or no?. ...
Electronics Forum | Mon Dec 12 23:00:25 EST 2011 | davef
Two things: * Consider a recent thread giving advice on solving placement problems: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=65288 * On adding pictures to your posts: ** On your original post, select EDIT ** Select ATTACHMENTS ** Se
Electronics Forum | Thu Dec 08 01:17:35 EST 2011 | mk15
Hi, I look Pick & Mount and Mount action was NORMAL - OK. When the head pick component then stop outside lamp housing (fixed camera - recognition camera) and then discard component. It repeat 3x, and Error E2. When I do adjust assistant for componen
Electronics Forum | Fri Dec 09 11:00:47 EST 2011 | davef
Using common wire size and through hole diameter, we'd expect that the wave solder process would completely fill the through hole and that you wouldn't need to get involved in providing stencil openings, pasting the through hole or reflowing the jump
Electronics Forum | Tue Dec 13 11:27:58 EST 2011 | ck_the_flip
Here's the scenario: PCB Plating: Lead free HASL, Sn100C Solder Paste used: Sn62 (regular tin/lead solder with 2% silver). Anyone see any issues with this? What are the process considerations? Anyone??? PS-9 times out of 10, I don't get answe
Electronics Forum | Tue Dec 13 17:03:39 EST 2011 | kahrpr
There should not be a problem we have done this. If you are concerned send out a test board to be analysed. we do this about twice a year mostly lead free just to make sure our process is good. the test results are also handy when customers question
Electronics Forum | Wed Dec 14 08:46:58 EST 2011 | cbroegger
Hi, we use some camera based readers, they can scan all barcodes in a square of roughly 10 x 10 inches. We have some pcbs with 3-4 barcodes (linear, 2D barcodes), and it can read them all in one take. I can find more information if you need that.
Electronics Forum | Wed Dec 14 17:25:58 EST 2011 | blnorman
Not really sure I understand. Are you trying to install MSL controls in the plant? If so, do you mean from the standpoint of say a MSL 5 part that has been exposed to the mfg floor for 24 hours then returned to the cabinet: how do you collect the i
Electronics Forum | Sat Dec 17 14:14:32 EST 2011 | shakerbose
We currently have several Vitronics Re-flow Machines, and I would like to know if I can move software V.10.01.00 from a XN1030 to a XA0820 machine running V. 08.00.00. Both machines have the same Controller Hardware Version A32.1.00
Electronics Forum | Thu Dec 22 18:54:30 EST 2011 | dwoodbury
Hi. We are having constant error messages from a Fuji QP341/MTU9 tray unit. It says there is a safety relay failed to start in prescribed time. Nothing we do seems to fix it, but rebooting enough times and eventually it goes away. We changed relay bo
