Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Tue Mar 20 09:35:30 EDT 2007 | ck_the_flip
I know a guy who pronounces solder (SOW-DIR), and dross (DROSE). Maybe, as the other guy says, your customer is from South Boston... but here's the "dictionary definition". Main Entry: sol�der Pronunciation: 's�-d&r, 'so-, Britain also 's�l-d&
Electronics Forum | Tue Mar 20 14:03:45 EDT 2007 | stepheniii
Once I read a health and safety report complaining about "sawdust". I was confused and thought maybe Manfred had been sawing something in the back and handn't cleaned up which would have been very strange. Later Manfred came and asked if I had read
Electronics Forum | Tue Mar 20 10:27:36 EDT 2007 | davef
Print styles: Print - Most common print mode * A single print stroke forward on first board * A single print stroke reverse on next board Print-Print (Double Print) * Both forward and reverse printing strokes * Helps to ensure complete filling of th
Electronics Forum | Wed Mar 21 13:21:53 EDT 2007 | scooter
I wish you wouldn't have asked why! We had a rush job and the stencil maker used a frame (normally we don't use the frame type) and placed in the frame wrong so in order to get it to work we printed in both direction. So I thought maybe we should do
Electronics Forum | Tue Mar 20 21:49:38 EDT 2007 | davef
Mark there is no need to YELL here. Turn it down, please. While you're waiting for other to reply, search the fine SMTnet Archives to find threads like: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=34512 You'll find that the followi
Electronics Forum | Wed Mar 21 11:52:56 EDT 2007 | slthomas
Mark, the only Panasonics I've worked with were MSHIIs and an MPAV2B and at this point I'm foggy on both, but both tracked component inspection errors quite well. You should be able to tell how many parts are rejected for thickness inspection errors
Electronics Forum | Tue Apr 03 01:17:57 EDT 2007 | Haris
Dear all, One of the major reason is that some components have curved shape terminations and thats why their attrition rates are high. So CORRECT THEIR VISION FILES OR IF PROBLEM REMAINS THE SAME THEN INCREASE THE TOLERANCE OF THAT COMPONENT VISION
Electronics Forum | Tue Apr 10 14:01:24 EDT 2007 | paul_stamper
Mark: One thing you will find with the Panasonic software is that it will use one component file for the same size/shape component. This is a good starting point. However, you may have better succes changing the part numbers you tend to lose more of.
Electronics Forum | Wed Mar 21 23:02:04 EDT 2007 | Guest
I did convert YM 84V for 0402, base on my expperience , this approach is not really good.This model were not really meant for 0402 placement. Nozzle H ID is really small and prone to clogging, therefore cleaning every 2 hours is a necessity( not id
