Electronics Forum | Tue Jan 12 00:43:20 EST 2016 | jrterry
I am shopping around for a cheap pick and place to do a few small runs of boards, just something to hold me over until I get things lined up to buy a high quality permanent machine. I have come across a few Quad 100s that are ridiculously cheap and
Electronics Forum | Fri Aug 26 22:17:17 EDT 2016 | ttheis
If you are looking at the machines from Burton; I suggest you contact them and ask them questions. I just bought their MPM UP500 printer and despite its many quirks does print well for us at the price they let it go for. Others are right though don't
Electronics Forum | Thu Jan 14 09:25:34 EST 2016 | davef
IPC-A-610F 10.2.6 Laminate Conditions - Depanelization talks to the acceptability of the depanelization criteria for assembled boards. There is no requirement for moisture sealing with epoxy or other material. Basically, the standard requires that th
Electronics Forum | Wed Jan 13 09:32:56 EST 2016 | mario
Hi everyone, I am looking for a distributor for the Folungwin wave machines, we need to buy solder pot heaters part number FL-MD-E-LD-FRG-01 and our canadian distributor only has a few units to sell and the leadtime seems to be around 4 weeks, meanwh
Electronics Forum | Wed Jan 13 13:00:14 EST 2016 | anvil1021
We are experiencing a few issues every now and then with acceptable reflow results? We have changed solder paste, thus reflow profile types and even reflow ovens but we still seem to get some not so good reflow on certain pcbs. We can even take PCBs
Electronics Forum | Sun Jan 17 20:36:49 EST 2016 | ttheis
I'm trying to configure the nozzle changers on my GSM1 machine because they were not configured when I bought it. I've figured out most of the setup with the UPS documentation, but I don't know what the I/O addresses are for the changers. Does anyon
Electronics Forum | Mon Jan 25 17:58:22 EST 2016 | spoiltforchoice
I think its sufficiently niche that the only similar product is the Essemtec Scorpion, which is cheaper and slower. However depending on just how low volume you are Essemtecs platform can also pick and place on the same machine (albeit with few jet n
Electronics Forum | Thu Jan 28 09:21:48 EST 2016 | cyber_wolf
I would challenge anyone to present a legitimate cost justification on one of these machines that was not related to a very specific product/project. In other words I want to see what the advantage is $$ wise purchasing this machine over a screen pr
Electronics Forum | Wed Mar 02 02:07:06 EST 2016 | mbass
3000 components per side and yes the actual print cycle is longer (13 minutes) against the DEK print stroke of 30 seconds. But overall the whole cycle time of set up etc is way less on the MY500. The ability of the machine to adjust volume of paste o
Electronics Forum | Thu Jan 21 09:55:14 EST 2016 | Sam
We are running a project that is 5 years old. We have yet to resolve all of the issues. Out biggest is warping due to the board being .012" thick. We have created a custom pallet (ricocel) and pallet cover (FR4) to sandwich the board but I am afraid