Electronics Forum | Mon Feb 18 08:11:27 EST 2019 | tomazicrok3
hello i have samsung cp40cv and this errors comes up can someone help me. vision communication error(1000)(1000), no sequence-finished from handler(%1), no command response from handler (0x2002).
Electronics Forum | Mon Feb 18 09:49:43 EST 2019 | bobpan
This is going from my memory from a long time ago...but in the scp.ini file....there could be digital light control and/or a matrix tray handler setting. I would turn them off if they are on. I believe this has something to do with a system setting.
Electronics Forum | Wed Sep 30 15:27:34 EDT 1998 | jvo
I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is software.
Electronics Forum | Wed Sep 30 16:36:59 EDT 1998 | Dana R Simon
I've been looking for a vision system which can check our fully mounted boards containing a mix of smt and thru hole. The concepts on all the machines are virtually the same, they got about 12-16 cameras, some pcb fixing and the rest is soft
Electronics Forum | Tue May 18 16:40:22 EDT 2010 | m79d
I am having some problems getting the IP1 to place a SSOP28 package,pitch 0.65mm lead width 0.3mm. I am selecting computer vision 012 (tried 011) and vision type 100. EL data was put in looking at the datasheet and also measuring the device. Have tri
Electronics Forum | Tue May 18 21:43:02 EDT 2010 | ashley
Hello mickd, 1) The EL data & Vision_type is NOT necessary when using MCS30 for IP1 machine. note : your input of the above might have cause confusion during VP, hence the OS error. 2) I would suggest the following... 2a) lower the Lead_check_are
Electronics Forum | Sun May 23 21:33:42 EDT 2010 | ashley
"The part is picked up and head goes to it's xy location" Hello mickd, I believe VP had passed but machine is confused how to compensate & place. OS error normally associate with a faulty VME card. Please check the following :- VM1152 VM1730 VM193
Electronics Forum | Wed May 09 12:07:52 EDT 2001 | caldon
My personal favorite is the Siemens F series and the UIC GSM platform. Both Siemens and UIC have awesome resources for csp, flipchip and baredie processing - Siemens= Dan Baldwin from GaTech; UIC = George Westby from UIC labs. My second choice would