Electronics Forum | Thu Oct 05 23:44:55 EDT 2006 | zoltans
Hi, Has anyone got first hand experience with the JT wave soldering machines, WS series? I use a low solid VOC free flux and it seems I have problems atomizing the flux properly and this generates soldering defects, leaving lumps and big solder bal
Electronics Forum | Sun Oct 08 23:37:37 EDT 2006 | zoltans
Hi, Has anyone got first hand experience with the JT wave soldering machines, WS series? I use a low solid VOC free flux and it seems I have problems atomizing the flux properly and this generates soldering defects, leaving lumps and big solder bal
Electronics Forum | Tue Mar 07 18:18:11 EST 2023 | proceng1
The onsite generator drops approx. 30psi from the input. We feed ours 110psi and end up around 80psi in the tank, which we regulate to 65psi for the machines.
Electronics Forum | Tue Mar 07 18:51:47 EST 2023 | ccouture
Sounds right, our actual pressure in the system is 120psi, the regulated to 100 in the machines.
Electronics Forum | Wed Feb 19 06:14:06 EST 2020 | toki
I would like to know when to consider top preheaters in a wave soldering machine. I am very new to this field. All responses are appreciated.
Electronics Forum | Mon May 10 20:16:02 EDT 2004 | wdlau
it can adjusted per the machine and your boards, Not a fix for every board, also if you are talking about the LF wave soldering process, it should be moved to largr angle compared to the tranditional sn/pb soldering
Electronics Forum | Tue Jun 12 12:14:49 EDT 2007 | slthomas
"In your example, you are comparing "Energy used to heat the solder and keep it warm" versus "Energy used to keep the solder warm" and fully discount the fact that the machine was ever turned off." Track and field fans refer to this as the "Bob Cost
Electronics Forum | Thu Sep 30 17:04:39 EDT 2010 | 18424
Try Looking at Selective soldering, Unless you have that many through hole components. Ace offers a great machine for selective soldering.
Electronics Forum | Mon Apr 01 19:57:07 EST 2002 | davef
Selective soldering machines are a good way to "finish automation", if the design of the PCB is conducive to the application with just a few components to solder. Your points are good. A decision matrix for selecting a machine might also include:
Electronics Forum | Tue Mar 07 21:28:30 EST 2023 | stephendo
What purity? To get 99.999% pure you will need dewers of liquid nitrogen or a two stage system. (and a dewer will last about a month and a half even if you don't use it as it outgasses.) But you can get reasonable purity with a wall mounted single s
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
winsouce.jpg)
