Electronics Forum | Thu Dec 14 21:10:42 EST 2000 | Jeff
elfego, i used to wwork at a place with the following line layout: * Loader * MPM Hi-E * Triscan Solder Inspection Machine (affectionately called the "Trashcan" by the technicians ;-) * 2 Phillips FCM fast chip mounters * 1 Phillips Topaz "hybrid" (
Electronics Forum | Mon May 08 01:47:56 EDT 2000 | Jack
Charles, I think the misplacement can be devided into 2 groups: 1. parts misplaced by machine 2. parts move as the X-Y table moves If you use the solder paster right, and the place force is properly setup, the second group will be definitely no exce
Electronics Forum | Wed Mar 14 09:16:45 EST 2001 | gsmguru
In the past I've removed shields with a dedicated hot air machine. (Similiar to an SRT) This machine could remove and replace shields using a stereo microscope and a positioning system. Basically a special nozzle is designed for each type of shield.
Electronics Forum | Tue Apr 25 10:18:46 EDT 2006 | evsint
I would challenge that comment NAME ONE You are correct regarding the old Earth-Tronics SRS machines But EVS is a new company and the new models the EVS 3000 adn EVS 6000 have been totally redesisgned and all who have used the old machines and n
Electronics Forum | Fri Dec 15 01:37:21 EST 2006 | shrikant_borkar
Hi, Hemendra Recently, We have carried out lead Free Soldering On our 4+1 Panasonic Reflow machine. Results were fine , but its Not Recommended for long Run. but the machine which you have is 5 zone machine and additional 2 cooling zone too. Check
Electronics Forum | Thu Nov 01 22:19:57 EDT 2007 | lvzhu
The solder that we used is kester EM918 and Multicore LS328. Our printer machine is DEK-photon, this machine has supply below 300mm/s. the datasheet solderpaste of speed range is 30 to 150mm/s. when we produce the keyboard of the moble phone, this bo
Electronics Forum | Tue Nov 20 15:06:34 EST 2007 | solder_master
I looked at the Kiss104 and the SPA-400 at the SMTA show in Orlando. I spent an hour with the ACE rep, and walked away totally confused as to how the machine is programmed. I spent 10 minutes with the rep from APS Novastar, and using their Photoscan
Electronics Forum | Fri Feb 15 07:52:27 EST 2008 | lococost
Dear SMTnetters, I've been told to have a look at finding a machine that could mill the leads of all PTH components to a certain height on an assembeled and soldered PCB. PCBs should be inserted in one side of the machine and come out milled on the
Electronics Forum | Mon Mar 16 16:58:51 EDT 2009 | Charlie D
We evaluated several rework machines a few years ago and decided on the Finetech CRS-10. It outperformed the Airvac DRS25 machine. We didn't bring in the Focal Spot because it uses IR. The Focal Spot System does not have a solder removal option and
Electronics Forum | Wed Apr 06 08:18:19 EDT 2011 | don7888
Hi Has anyone managed to accurately produce a spreadsheet or formula that will accurately calculate the amount of boards your SMT line will produce an hour. I work in a high mix low volume industry and we are constantly taking on new jobs but have n
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Equipment Dealer / Broker / Auctions
104 East Street
Middleton, MA USA
Phone: 978 790-2774
.gif)
