Electronics Forum | Mon Jul 29 19:21:58 EDT 2002 | davef
Look to: * Your flux supplier's recommendations to baseline your recipe [similar to using your paste supplier's recommendations for setting your reflow recipe] * 7530 'Guidelines for Temperature Profiling for Mass Soldering (Reflow and Wave)' for gui
Electronics Forum | Mon Jul 29 18:57:17 EDT 2002 | pzohbon
Does anyone know where to find information for wave temp profiling? pzohbon
Electronics Forum | Tue May 20 03:21:05 EDT 2008 | grayman
I sell wave solder optimizer in Philippines. I have sold many of this optimizer system. It cost less than US$10K. Most of my customer is happy with the performance except for some issues from customers like LCD not yet colored, uses RS232, upgrades
Electronics Forum | Mon Dec 04 21:42:12 EST 2006 | KEN
Keep in mind that device pitch, pad geometry, lead length and even alloy type will play a roll in your evaluation. I have an assembly that we run 10k pieces per month. One two-pin connector has a pitch of 1.27mm. Unfortunately, the pads are 0.007"
Electronics Forum | Mon Dec 17 13:58:54 EST 2007 | ck_the_flip
I made my own wave measuring device using KIC2000 system. KIC2000 has automatic wave detection, so now I have a profiler for both reflow ovens and wave solder. The delmat carrier only cost $500. A guy, Samir, from this forum gave me the idea, actu
Electronics Forum | Mon Jul 10 07:46:51 EDT 2006 | ronalds
You are right, RSS profile is not the correct description. I am using a profile which heats up quickly to let the flux spread. Next linear up to activate the flux and prevent thermoshock. My experience is however, that small changes in this profile
Electronics Forum | Thu Jul 06 12:52:35 EDT 2006 | samir
..and he can put the flux in and keep it a secret too from his customer.. RSS profile on wave?? I never heard of a soak zone for wave preheat...you may be burning off your activator..hence, the beads. For wave preheat, your main goal is to ramp up
Electronics Forum | Mon Jul 03 05:39:05 EDT 2006 | ronalds
Hi, I am experience problems while testing wave soldering SMT components that are glued on the solderside (lead free). Between de leads of SOx type IC's and SOT's develop a great deal of solder beads. I have been using a RSS temp.profile while spr
Electronics Forum | Tue Sep 02 22:03:03 EDT 2008 | davef
Try: * IPC-7530, Guidelines for Temperature Profiling for Mass Soldering (Reflow and Wave) http://portal.ipc.org/Purchase/ProductDetail.aspx?Product_code=3f5288fc-b386-db11-a4eb-005056875b22 * http://www.smtinfo.net/Db/_Reflow%20Soldering.html
Electronics Forum | Fri Sep 03 09:09:42 EDT 2004 | John
Does anyone know how to make a thermo profile on selective machine with one solder nozzle?The problem is that there are many points and lines with different break time and different speed. Thank you
.gif)
