Electronics Forum | Fri Jul 15 03:29:52 EDT 2005 | dougs
thomas, why isn't it process control, you cant just think that because you've set up your machine properly ( pot temp, wave height, pre-heat etc etc )that everything is going to be ok, there are other factors that you wont find with wave riders or
Electronics Forum | Fri Jul 15 12:41:56 EDT 2005 | russ
You are not wrong in monitoring the Product (your really not monitoring the process). This methodology is valuable if your process is unstable (SPC is used to stabilize process). There is value in "real time" inspection of a process's product as lon
Electronics Forum | Thu Jul 14 15:24:55 EDT 2005 | valuems
Thanks pr I know what you mean, and just to let you know, you can turn the over head one off and get one for the center nest. Will be more than glad to tell you how to turn off and turn the center nest one on. And just to tell every one else, were
Electronics Forum | Fri Jul 15 14:04:35 EDT 2005 | valuems
Hi I thought that I was the only one that thought that was confussing. Have almost never had any one mention this one. When I was a field engineer for mpm, people would say something about every thing being backwards and then they would just accep
Electronics Forum | Wed Jul 20 16:49:44 EDT 2005 | Pete Roy
We have two APS Gold ovens and are acheiving an accpetable Lead Free profile. We still have to further qualify board widths/sizes to determine what are limits are and still be within the profile we need. For the most part you need more zones/longer t
Electronics Forum | Fri Jul 15 14:16:09 EDT 2005 | seaK
We have this problem for a long time. It happens to 3 new Mydata MY-9 machine. When pick and place resistor array 0408 (different value, top and bottom side), the solder paste in the middle two terminals missing occasionally. Thought it's because noz
Electronics Forum | Tue Jul 19 05:16:34 EDT 2005 | aj
Hi, I looked at the pictures and it looks as if it should be a straight forward solution..but obviously not. I would focus on the stencil/print more than placement machine. The placement machine simply places the part on the board!#(just one thing
Electronics Forum | Tue Jul 19 09:45:51 EDT 2005 | cyber_wolf
I have seen this problem on Mydata machines before. I am very sure that your missing paste is being caused by the placement machine. Check these things : 1. There is a small white check valve on the pressure side of the vacuum pump. Make sure it is
Electronics Forum | Tue Jul 19 12:29:20 EDT 2005 | cyber_wolf
How does the mount plane change if the surface of the board is located in the same place every time ? For example: If you put 2 boards side by side on the Y wagon : one board measures .020" and the other .200" the surfaces of the boards are going
Electronics Forum | Mon Jul 25 18:30:54 EDT 2005 | grantp
Hi, I know this is not exactly SMT related, but it's the right group to ask, but we need better powered screw drivers, as the electric ones we have the girls are having difficulty screwing in the plastic screws we use. Can anyone recommend good sc
