Electronics Forum: windings (Page 1 of 14)

how to compute the inductance value of sectoral winding of coil

Electronics Forum | Fri Jan 13 00:26:52 EST 2006 | arnold

in computing inductance of core i use L = (NxN)x AL value of core. is it the same for coil that has sectoral winding.

how to compute the inductance value of sectoral winding of coil

Electronics Forum | Fri Jan 13 06:48:31 EST 2006 | pjc

http://www.qsl.net/in3otd/indcalc.html No mention of sectoral winding though.

Coil winding machine

Electronics Forum | Tue May 12 16:23:45 EDT 2009 | janz

Hello, I am looking for manual for Aumann coil winding machine type WU100 or similar machine. Anyone could help me.? Regards Janz

Quad IVc Main Breaker

Electronics Forum | Tue May 07 15:30:41 EDT 2013 | bobpan

your card is probably bad.....you can ohm out the motor and cable if you want... z motor windings 1.36 ohms z motor cable and windings 1.82 ohms good luck

How to repair Geared motor

Electronics Forum | Tue Jan 18 23:28:30 EST 2011 | story108

how can i repair the geared motor.,because most of them was shorted on motor winding.

5 Zone Reflow Oven

Electronics Forum | Mon Oct 26 17:04:30 EDT 2009 | stepheniii

IIRC the IPC spec for oven profiling says the thermocouple leads should not be more than one meter in length. I think when you can afford it, getting a data logger to go through the oven would be a good idea. But if you are going to use the very lon

Searching for low cost transformer supplier

Electronics Forum | Fri Sep 04 21:04:33 EDT 2015 | sarason

How high a voltage are we talking , 240 volts, 4000 volts , 26000, volts 60,000 volts, 240 volts is easily done as we go up the scale insulation becomes a bigger problem and winding machines have to be much better in control of tension,also at higher

Re: Kapton tape over displays

Electronics Forum | Wed Sep 27 19:57:41 EDT 2000 | Dave F

Our display suppliers provide displays either with: * Molded plastic cover that we recycle to them * Plastic film like the guys that change your oil put on your wind shield to remind you when to get your oil changed.

Santa Anna's and ESD

Electronics Forum | Mon Jan 18 15:12:53 EST 1999 | Nikki

I had read something a long time ago about the effects of the Santa Anna winds on electro-static discharge. Does anyone know where I might be able to find information on this? Thanks, Nikki

Re: Santa Anna's and ESD

Electronics Forum | Tue Jan 19 08:24:53 EST 1999 | Dave F

I had read something a long time ago about the effects of the Santa Anna winds on electro-static discharge. Does anyone know where I might be able to find information on this? Thanks, Nikki Nikki: The link's not a direct answer, but clo

  1 2 3 4 5 6 7 8 9 10 Next

windings searches for Companies, Equipment, Machines, Suppliers & Information