Electronics Forum | Mon Mar 13 13:01:08 EDT 2017 | emeto
Very interesting, how you can answer that with that many details that you gave us. Here are some preliminary questions, before anybody can give you any answer: Pb or Pb-free? 3mil stencil or 8mil stencil? How many shifts? Quantity will depend also o
Electronics Forum | Wed May 17 02:32:39 EDT 2017 | bukas
Rob explained very well what it takes to start SMT line. The question is what infrastructure do you have at your factory? any category Rob mentioned can have time consuming complications and this is why you should find professional to start the SMT
Electronics Forum | Wed May 24 11:22:24 EDT 2017 | robl
Yes we have it, and it can do a job. They are good people that want to help. A lot depends on what ERP you have, and if they have a bridge for it. We have had to write our own brige for importing BOMs into our ERP. It does do great things with
Electronics Forum | Mon Oct 09 06:04:47 EDT 2017 | bobpan
Hello Joyce, Usually I use Very Large cable ties and secure the heads in the opposite corners. I also tie up the z rods or put some plastic tube under the top portion to keep them up. Remove the monitor and bracket off the side of the machine...and i
Electronics Forum | Wed Dec 13 08:25:37 EST 2017 | emeto
Another aspect is the maintenance and repair of the feeders. When a bank of 10 feeders goes bad, you lose 10 positions right away. Even if you have spares, now you have to move 10 parts instead of 1. Very often you will have only one bad slot, and no
Electronics Forum | Tue Mar 06 07:04:44 EST 2018 | alpha1
If you have the @? you have communication to the controller. If you send me the exec I can tell you if it's the right one. After that take the old battery out and put the one in that reads 3.1. It's probably ok just needs a charge. Once you get a goo
Electronics Forum | Wed Mar 21 15:32:08 EDT 2018 | padawanlinuxero
I agree with the other comment, if you have misprint something is wrong with the screen printing process, meanwhile try to get a ultrasonic cleaner for your boards, another thing you can do is to use dummy boards, if you don't have a lot of different
Electronics Forum | Fri Aug 17 06:29:41 EDT 2018 | cyber_wolf
Correct stencil, wiping frequency effectiveness,and correct paste deposition are all verified by the SPI machine. I suppose you can put all kinds of things in place, but you may want to determine what is practical and "why?" are you doing it. Trac
Electronics Forum | Sat Mar 09 01:27:23 EST 2019 | buckcho
Hi, Rob. I have used Parmi and Koh Young SPI. Both have epmSPI software in which you load stencil gerber, load cad data(if you want) connect the pads to the designators, point fiducials and done. Can take from 10-15 up to 30 minutes, depending on how
Electronics Forum | Tue Jul 16 22:24:39 EDT 2019 | smttony
Hello David I see you information , Now you use the T960 samll reflow oven is can't meet your requirement anymore. According to your budget, i think the Jaguar 6 heating zones and 8 heating zones is very suit for you. I'm a sales engineer in Jaguar
.gif)
