Electronics Forum | Thu Aug 04 13:58:20 EDT 2016 | sumote
Does anyone have the technical specifications for the Fuji CP6 and the Fuji IP3? Looking for the placement speed (parts per hour), accuracy, smallest/largest component size, fine-pitch (what size it can do). Our new sales guy is putting together some
Electronics Forum | Mon Aug 15 10:07:21 EDT 2016 | capse
In screen printing the material is transferred through openings in the screen mesh. You can imagine small columns of "ink" that coalesce after the screen releases. Screen printing is also an off-contact process verse contact process of stencils. The
Electronics Forum | Mon Nov 19 06:34:33 EST 2018 | davechow
Hi Clayton As I know Icap is a trading company for PCB,and it is not Chinese company. If you need PCBs,please contact me(e-mail:445320233@qq.com) Flex-rigid board up to 20 layer,FPC board up to 8 layer,rigid multilayer up to 32-layer and HDI 2-steps,
Electronics Forum | Mon Aug 22 08:54:15 EDT 2016 | bobpan
More than likely the encoder scale or read head has an issue. Many times.. oil/dirt/water get on the scale and cause a bad spot or bad area. Try to clean the scale with a lint free cloth and alcohol. You should also be able to see the read head and m
Electronics Forum | Tue Aug 30 07:44:39 EDT 2016 | ariss_t
Very good explanation.. yep.. after 4 set of vision cable and a new usb3 port, the problem solve.. seems like the purple cable were the root cause .. The 1st cable on marginal pass failed but not shown the "camera 0" error and we still can poll the
Electronics Forum | Thu Sep 08 22:39:20 EDT 2016 | ttheis
Here's an idea; buy a pcb conveyor and design a simple label applicator to mount to it. Maybe replace the logic with your own or replace the PLC in the conveyor with your own solution. Shouldn't be much more than a few sensors and and a stepper motor
Electronics Forum | Tue Sep 13 10:00:27 EDT 2016 | awhite
Switched out the mech. relay on the board loader, no change. Same behavior. Could not find a mech. relay on the printer... SMEMA wiring appears go directly to a PCB. And it is at that point that I run out of talent. If the machine weren't dedicate
Electronics Forum | Thu Sep 15 09:31:02 EDT 2016 | ladmo1
While removing one part, another part - BGA part - several components away, actually melted on one corner - you can see the plastic body of the part oozing out around one corner between the solder balls. Several of the solder balls on the one corner
Electronics Forum | Sun Oct 09 22:07:51 EDT 2016 | geniepro
I would like to ask after glue bonding is abalibity drop. I test by force equipment that it is very difficult to drop after reflow 2. Very due by DIP machine. I check after Dip many chip drop. I wonder the glue not qualify I am using IR 130. Could yo
Electronics Forum | Tue Mar 07 09:35:55 EST 2017 | buckcho
hello, I have a problem with CP45FV Neo swing > mirror. The mirror it self works fine, manually > controlled it moves to correct position and back. > While working it also moves properly but when > machine is about to check for nozzle existence a
