Electronics Forum: z and overtravel (Page 1 of 3)

Tp9 and Tp9 ufp

Electronics Forum | Tue Oct 25 15:03:48 EDT 2011 | sjs2303

Hi Bert, For your second issue, are the tools well lubricated? If not the Midas head can fail to grab the tool and can generate the z motor error. Doing this followed by a base-centre level measurement should resolve your problem. Steve

ESD Smocks and chairs

Electronics Forum | Tue Jun 19 21:44:20 EDT 2007 | rfrog

The first thing that I would do is contact the smock manufacturer and ask them for advice on testing the smocks. ESD FROM A TO Z 2nd ed. (Kolyer) states that: smocks should have a resistivity of less than 10^12/sq and must not shed steel fibers.

Tp9 and Tp9 ufp

Electronics Forum | Mon Oct 24 16:24:53 EDT 2011 | smdbert

Hello, My name is Bert i'm working by LéTÉ with two mydata smd machines and have sometimes several problems ,most of the problems try to solve it by myself but sometimes the boss also helps and i write the errors in map but first of all 4 questions

Tp9 and Tp9 ufp

Electronics Forum | Wed Oct 26 11:02:41 EDT 2011 | dyoungquist

TP9 machines are good, but old machines. We ran a TP9 for many years. As the machine got older it required more and more maintenance and had more frequent small issues similar to what you are seeing. We only saw 1 of your 4 issues specifically whi

OSHA regs and safety glasses

Electronics Forum | Wed Dec 12 11:53:09 EST 2012 | rway

Well, I answered my own question. Here it is for everyone's benefit. The glasses must meet the ANSI Z87.1 standard for safety. So basically, if they are not stamped with Z87.+, then they are not compliant.

Fuji Pick and Place Machines

Electronics Forum | Wed Oct 13 08:17:14 EDT 2004 | stefwitt

I wonder, how valuable this piece of information is. How careful did you look at the machine and found out that it is actually written SIEMENS? Are you sure it is a Siemens machine or maybe it is Sony? It also starts with a Z.

Universal GSM and 0402/0201 Placement

Electronics Forum | Fri Jan 16 15:46:07 EST 2015 | comatose

We did 0402s for years on a GSM. Is this a flexjet or a 4 spindle head? A flexjet is easy with 0402s. The four spindle nozzles are big, you run into issues with knocking already places parts and having to Z zone carefully (and beware repair cycles.)

Mydata Hydra and 0201 components

Electronics Forum | Fri Sep 02 07:38:13 EDT 2005 | DannyJ

Hi Mike, I haven't tried the 0201s with a Hyrda, but after seeing 20 reviews of your message without a response, I'll try and share my experience with 0402s on a non-Hydra machine. The 0402s are slow, but I managed to get some speed by maxing out

Re: Buying stenciling and pick and place equipement.

Electronics Forum | Mon Dec 20 13:39:08 EST 1999 | Wolfgang Busko

Hi Clarissa, seems to be a real start up situation you are in. For the printing there is IMO no need to buy any sophisticated automatic-vision-alignment-self-cleaning-inline-and-more-machine. Features you need: - adjustable in X-,Y-,Z-axis (individu

MPM UP3000 Question

Electronics Forum | Fri Aug 11 12:45:10 EDT 2006 | mpm fan

It's been awhile but isn't there a sensor to tell the middle conveyor when it is lined up with the incoming and outgoing rails? If so that would explain why the table goes into Z axis overtravel. It still means your Y isn't working but makes it less

  1 2 3 Next

z and overtravel searches for Companies, Equipment, Machines, Suppliers & Information

High Throughput Reflow Oven

ONLINE IPC Training & Certification


Best Reflow Oven