Electronics Manufacturing Technical Articles

Electronics Manufacturing Technical Articles

Papers and articles related to SMT, PCB & EMS industry.

  • Reflow Ovens
  • Precision, fluid dispensing systems for low volume, high mix, R&D, and high volume 24x7 production

Add Article »

1798 SMT / PCB Assembly Related Technical Articles

Dielectric Material Damage Vs. Conductive Anodic Filament Formation

Jul 27, 2021 | Paul Reid

It should be noted that this is an overview paper that represents the early stages of an ongoing investigation into the causes and effects between conductive anodic filament (CAF) formation and printed wiring board (PWB) material damage. Our belief is that certain or specific types of material damage can increase the propensity for CAF formation. The preliminary data collected suggests is that there is no statistical correlation between the general definition of material damage (cohesive failure) and CAF. The resulting dichotomy is that we find no CAF failures in some coupons that have obvious material damage and we find CAF failures in coupons that don't exhibit material damage....

Publisher: PWB Interconnect Solutions Inc.

PWB Interconnect Solutions Inc.

PWB designs and manufactures test equipment and provides services to test the reliability of Printed Circuit Boards.

Nepean, Ontario, Canada

Manufacturer

ECM And IOT How To Predict, Quantify, And Mitigate ECM Failure Potential

Jul 27, 2021 | Mike Konrad

Fast forward to current time. Today, our society embraces cleanliness. We expect, demand, and evaluate cleanliness in almost every aspect of our lives. We wash our cars and pets. We maintain high cleanliness standards in our hotels and public spaces. We require cleanliness in our restaurants and hospitals. We sanitize our hands throughout the day to prevent illness. We live in a clean-centric culture. While we drive clean cars, stay in clean hotels and eat clean food, there is one part of our life where we actually abandoned cleanliness. Many of the circuit assemblies that affect almost every aspect of our daily lives are no longer required to be clean. Even though our life experience confirms the link between cleanliness and reliability, happiness, health, and safety, circuit assemblies no longer maintain that "cleanliness is next to Godliness" status. This was not always the case. There was a time when virtually all circuit assemblies were cleaned. The removal of flux and other process-related contamination was commonplace. Cleaning was as normal as soldering. As we bring history into current time, one may relate the fall of Rome and its adoption of personal hygiene and the subsequent decline in human health to the large-scale abandonment of cleanliness expectations of circuit assemblies and the subsequent reliability issues it has created. How did this happen? Has history repeated itself?...

Publisher: Aqueous Technologies Corporation

Aqueous Technologies Corporation

Manufacturer of automated defluxing/cleaning equipment, cleanliness testing equipment, and stencil cleaning equipment.

Corona, California, USA

Manufacturer

Conductive Anodic Filament: Mechanisms and Affecting Factors

Jul 27, 2021 | Winco K.C. Yung

Conductive anodic filament (CAF) formation, a failure mode in printed wiring boards (PWBs) that are exposed to high humidity and voltage gradients, has caused catastrophic field failures. CAF is an electrochemical migration failure mechanism in PWBs. In this article, we discuss CAF, the factors that enhance it, and the necessary conditions for its occurrence. Published studies are discussed, and the results of historical mean time to failure models are summarized. Potential reasons for CAF enhancement solutions are discussed, and possible directions in which to develop anti-CAF materials are proposed....

Publisher: Hong Kong Polytechnic University [The]

Hong Kong Polytechnic University [The]

With 80 years of proud tradition, PolyU is a world-class research university, ranking among the world's top 100 institutions. Hong Kong Polytechnic University (PolyU) is a home for educating thinkers, communicators, and discovers.

Hung Hom, Kowloon, Hong Kong

Research Institute / Laboratory / School

Global Connected Smart Thermostats Market to Record an Impressive Growth Rate during the Forecast Period 2021 to 2026

Jul 26, 2021 | David Wayne

Connected Smart Thermostats Market - Global Trends, Top Key Players, Industry Segments, Size, Development and Opportunities by Forecast 2021 to 2026...

Publisher: MarketsandResearch.biz

MarketsandResearch.biz

Marketsandresearch.biz is a leading global Market Research agency providing expert research solutions, trusted by the best.

Pune, India

Other

Printed Circuit Board Quality: Copper Wrap

Jul 20, 2021 | Jeannette Plante, BhanuSood, Kelly Daniluk

Motivation: High reject rates for PCBs due to specification non-conformances Multiple rebuilds causing impactful schedule delays + Copper Wrap + Wicking + Etchback + Annular Ring Are rejected boards reliable? What are PCB quality requirements for? + Reliability: fewer cycles-to-failure? + Manufacturability: define threshold of modern manufacturing capability?...

Publisher: NASA Office Of Safety And Mission Assurance

NASA Office Of Safety And Mission Assurance

The Office of Safety and Mission Assurance (OSMA) assures the safety and enhances the success of all NASA activities through the development, implementation and oversight of agencywide safety, reliability, maintainability and ...

Washington, District of Columbia, USA

Research Institute / Laboratory / School

A Study on Effects of Copper Wrap Specifications on Printed Circuit Board Reliability

Jul 20, 2021 | Bhanu Sood, John Shue, Jesse Leitner, Kelly Daniluk, Lionel-Nobel Sindjui

During the manufacturing of printed circuit boards (PCBs) for a Flight Project, it was found that a European manufacturer was building its boards to a European standard that had no requirement for copper wrap on the vias. The amount of copper wrap that was measured on coupons from the panel containing the boards of interest was less than the amount specified in IPC-6012 Rev B, Class 3. To help determine the reliability and usability of the boards, three sets of tests and a simulation were run. The test results, along with results of simulation and destructive physical analysis, are presented in this paper. The first experiment involved subjecting coupons from the panels supplied by the European manufacturer to thermal cycling. After 17 000 cycles, the test was stopped with no failures. A second set of accelerated tests involved comparing the thermal fatigue life of test samples made from FR4 and polyimide with varying amounts of copper wrap. Again, the testing did not reveal any failures. The third test involved using interconnect stress test coupons with through-hole vias and blind vias that were subjected to elevated temperatures to accelerate fatigue failures. While there were failures, as expected, the failures were at barrel cracks. In addition to the experiments, this paper also discusses the results of finite-element analysis using simulation software that was used to model plated-through holes under thermal stress using a steady-state analysis, also showing the main failure mode was barrel cracking. The tests show that although copper wrap was sought as a better alternative to butt joints between barrel plating and copper foil layers, manufacturability remains challenging and attempts to meet the requirements often result in features that reduce the reliability of the boards. Experimental and simulation work discussed in this paper indicate that the standard requirements for copper wrap are not contributing to the overall board reliability, although it should be added that a design with a butt joint is going to be a higher risk than a reduced copper wrap design. The study further shows that procurement requirements for wrap plating thickness from Class 3 to Class 2 would pose little risk to reliability (minimum 5 μm/0.197 mil for all via types).Experimental results corroborated by modeling indicate that the stress maxima are internal to the barrels rather than at the wrap location. In fact, the existence of Cu wrap was determined to have no appreciable effect on reliability....

Publisher: NASA Office Of Safety And Mission Assurance

NASA Office Of Safety And Mission Assurance

The Office of Safety and Mission Assurance (OSMA) assures the safety and enhances the success of all NASA activities through the development, implementation and oversight of agencywide safety, reliability, maintainability and ...

Washington, District of Columbia, USA

Research Institute / Laboratory / School

Inkjet-Printing-Derived Lead-Zirconate-Titanate-Based Thick Films For Printed Electronics

Jul 13, 2021 | Danjela Kuscer, Silvo Drnovšek, Franck Levassort

We have investigated the processing of lead-zirconate-titanate-based thick films by inkjet printing Pb (Zr0.53Ti0.47)0.98Nb0.02O3 with a 6 mol% excess of PbO nanosized powder dispersed in water. Differentwaveforms were employed to determine the optimum size and shape of the drops. A uniform, defect-free pattern with dimensions of 4 mm × 4 mm can be printed using 20 V and a drop spacing of 20 μm. The inkjet-printed films were heated to 400 °C to remove the organics and subsequently sintered at 750 and 850 °C. The correlations between the density, grain size and electromechanical properties of the thick films and bulk ceramics are qualitatively discussed. A thickness coupling factor of 46% was obtained for a 15-μm-thick film sintered at low temperature of 850 °C, which is comparable to the value of the bulk ceramic with an identical nominal chemical composition. Our results are important for the economic and environmental-benign printing of piezoelectric materials applicable in variety of electronic devices, such as sensors, actuators, transformers, piezoelectric energy harvesters and transducers....

Publisher: Jožef Stefan Institute

Jožef Stefan Institute

The Jožef Stefan Institute is the largest research institute in Slovenia. The main research areas are physics, chemistry, molecular biology, biotechnology, information technologies, reactor physics, energy and environment. ...

Ljubljana, Slovenia

Research Institute / Laboratory / School

Silver in Printed & Flexible Electronics

Jul 13, 2021 | Matt Watson

This Market Trend Report for the Silver Institute examines silver's growing role in printed and flexible electronics. According to our research, 33.9% of the annual silver global supply in 2020 ended up in electronics. This is a total of 327 million troy ounces (Moz) that finds its way into various electronics markets every year. Given the projected growth of electrification, we are confident that this will continue to grow over time since silver is the world's most conductive material....

Publisher: Silver Institute

Silver Institute

The Silver Institute is a nonprofit international association that draws its membership from across the breadth of the silver industry. This includes leading silver mining houses, refiners, bullion suppliers, manufacturers of ...

Washington, District of Columbia, USA

Association / Non-Profit

Advanced Technologies for Industry – Product Watch Flexible and printed electronics

Jul 13, 2021 | Chiel Scholten, Kincsö Izsak and Maialen Perez

Flexible electronics refers to a class of lightweight, flexible and electronic sensing components and electronic devices built on stretchable substrates1 that are used (and can be used) for a broad set of products and applications such as displays and sensors. The most prominent characteristic is that they can bend in contrast to electronic systems built in rigid materials. They are manufactured on flexible plastic substrates, such as polyamide, PEEK2 or transparent conductive polyester films3, or other materials such as paper, textile, or thin glass. The term flexible also refers to the roll-to-roll manufacturing process....

Publisher: European Commission - Executive Agency for Small and Medium-sized Enterprises (EASME)

European Commission - Executive Agency for Small and Medium-sized Enterprises (EASME)

The Executive Agency for Small and Medium-sized Enterprises (EASME) has been set-up by the European Commission to manage on its behalf several EU programmes in the fields of SME support & innovation, environment, climate action, e

Belgique/Belgiën, Belgium

Association / Non-Profit

ICT+FCT Test Transformation Case

Jul 10, 2021 | pti

An effective solution to reduce labor costs and improve production efficiency...

Publisher: Shenzhen PTI Technology CO.,LTD

Shenzhen PTI Technology CO.,LTD

Our company was established in 2004, Main products: ICT on-line tester, ICT, functional testing machine 、FCT、 TSI、 automatic test and control system (ATE), test automation solutions, etc.

深圳, China

Manufacturer

SMT spare parts - Qinyi Electronics
Fluid Dispensing Aerospace
Now Online
236
Visitors
1
Member

Who are SMTnet visitors?

Become a member now and receive the value and benefits of membership.

ipc certification
Thermal Interface Material Dispensing

ICT Total SMT line Provider