![Electronics Manufacturing Training](/images/icons/technical-library-icon.jpg)
Technical Articles From Hentec Industries, Inc. (RPS Automation)
Read technical articles about electronics manufacturing added by Hentec Industries, Inc. (RPS Automation)
- SMTnet
- »
- Technical Library
- »
- Contributors
- »
- Articles from Hentec Industries, Inc. (RPS Automation)
1 technical article added by Hentec Industries, Inc. (RPS Automation)
Company Information:
Techniques for Selective Soldering High Thermal Mass and Fine-Pitch Components
Aug 08, 2022 | Reid Henry
Selective soldering has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty however some types of challenging components require additional attention to ensure that optimum quality is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures, or solder pallets, often places additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors, can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues because of their beryllium copper base metal pins. Key Terms: Selective soldering, drop-jet fluxing, sustained preheating, flux migration, adjacent clearance, lead-to-hole aspect ratio, lead projection, thermal reliefs, gold embrittlement, solderability testing....