Yamaha YSi-V
Model: |
Yamaha YSi-V |
Category: |
|
Model Year: |
2017 |
Condition: |
|
Location: |
China |
Offered by: |
|
|
|
| Contact QYSMT SOLUTION USA LLC / Qinyi Electronics Co.,Ltd |
YAMAHA AOI YSi-V MACHINE KLT-000
1. Model: Yamaha ysi-v
2. Target substrate: l610 x w560 (maximum) ~ l50 x
w50 (minimum) & supports l750mm super long substrate (optional)
3.
Resolution: visible light (red/green/blue) & infrared (infra-red) 12μm / 7
μm (optional)
4. Inspection object: component status just after mounting,
solder paste and component status after curing
5. Power specification:
three-phase 200/208/220/230/240/400/416v, ±10% 50/60hz
6. Air supply: above
0.4mpa, clean and dry
7. Dimensions (except for the protruding part):
l1,252mm x w1,497mm x h1,550mm
8. Main body weight: about 1,300kg
Of course,
only understanding these basic parameters will not reflect the specifics of
ysi-v. So let me talk about the characteristics of the ysi-v high-end
hybrid optical appearance inspection device.
Features:
1, 2d high-speed,
high-resolution two-dimensional inspection
12 million pixel high-resolution
imaging
The industry is the first to adopt a 12-megapixel camera and a
high-pixel telecentric lens. At the same time, it is equipped with a high-
speed image processing and control system, which not only expands the field
of view, but also has high-definition and high-speed, and the inspection
capacity is more than twice that of the previous
Choose from 5 different
methods to achieve the best inspection (brightness, chroma, slope,
infrared, laser)
2. 3D height, 3D inspection of inclined surface (optional)
High-speed measurement of the height within the entire field of view at
once. It can also accurately detect defects that are affected by warped
parts, similar colors of substrates and components, or interference from
silk screens and pads, etc., which are difficult to detect in the 2D map.
In addition, you can also check the inclination and direction of the object
to accurately determine whether the shape is correct
3, 4d 4-direction
squint camera (optional)
In addition to shooting 2D inspection images
from directly above, it also adopts original imaging technology, which can
take a one-time oblique shot of the wrong position and all components in
the field of view from 4 directions, and accurately track the components.
Based on the images taken from four directions, it is possible to directly
visually inspect the substrate without removing the substrate, thereby
preventing human errors caused by touching the substrate and reducing the
number of processes.
4. Support qa optional software, smart phone judgment
(optional)
Smartphone judgment
The detected bad information is sent to the
operator’s smart phone through the wireless LAN network, which can be
remotely judged through the smart phone
qa optional software
After the
defect is detected, it will automatically feedback through the lan network.
Forcibly stop the operation of the target placement machine and display the
component mounting position, placement head, nozzle type and other
information related to different components on the screen of the placement
machine
5. The dual-track system can be used for 2 rows of parallel
transmission to improve the inspection speed of medium and small
substrates; it can also transmit large and ultra-long substrates up to
1750mm (optional)
Company Information:
