OBSMT OB-W310
Model: |
OBSMT OB-W310 |
Category: |
|
Model Year: |
2014 |
Condition: |
|
Value: |
$ 3050.00 |
Location: |
China |
Offered by: |
|
Contact Supplier |
Semi-automatic wave soldering machine
Specifications:
MODEL OB-S310
Demensions 820*700*1180mm
Pot size 450*350*80mm
Pot capacity 50KG-60KG
Solder Residue Capacity in 24 hours 0.2KG-1.0KG(the specific should according to the production and the quality of the solder)
power 220V/50Hz-60Hz
Initial power 4500W
Constant temperature power 800W-1200W
Start control method Manual control or foot switch control
Heat-up time approx. 50 minites
Temperature control PID+SSR driving, precision is ±3°C
power 1P AC 110V/220V 50HZ
Power switch Air switch
Relative humidity not more than 85%RH
Environment temperature 5~30°C
System control mode By Mitsubishi PLC control
PCB size 30mm*30mm—420mm*320mm
Weight Approx.100KGS
Function:
Dip soldering method: After flux, put the PCB onto the needle board,step on the foot switch, then you can finish one time welding (which can weld several pcs PCB one time).The welding angle is controlled by the microcomputer,complete simulation the handwork welding principle, it’s no need training or any skilled workers ,anybody can operate it, welding quality is stable and high, and it improves the production efficiency.
Welding the PCB board or other general soldering products.(using the suitable fixture)
Improve the welding quality , imitation the handwork welding.
Enhance productivity, welding by bulk, it’s about 4 times faster than handwork.
Up and down is using the step motor driving the ball screw, precision is up to 0.1mm, welding depth is accurate.
The speed of the up and down can be adjustable, the welding angle is adjustable,which can derease the surface tension, fulfill the technique requirement.