YS88 multi-function module chip mounter

Product name: YS88 multi-function module chip mounter
Product number: YS88

Products in detail
The characteristics of
Configurable ~ 0402 chip - 55 mm components, the wide range of special-shaped long joint element
The height of the object element corresponds to 25.5 mm
10 ~ 30 n can be easy to stick load weight control
All the time, QFP pasted on absolute accuracy + 30 microns, repeatedly QFP pasted on the accuracy of plus or minus 20 microns
Corresponding multifunctional special-shaped requirements, with 8400 CPH (equivalent to 0.43 seconds/CHIP: best conditions) ability of SMT
Substrate: (L510 x W460mm) corresponding to the L size
Object substrate: L50 * W460mm W50mm ~ L510

SMT efficiency
Conditions (best) 8400 CPH/CHIP (equivalent to 0.43 seconds/CHIP)
SMT precision: (the company standard components) absolute accuracy (mu + 3 sigma) : + / - 0.05 mm/QFP/CHIP, plus or minus 0.03 mm
Repeatability: (3 sigma) : + / - 0.03 mm/QFP/CHIP, plus or minus 0.02 mm
Object components: 0402 (mm) - - 55 mm components, SOP/SOJ, PLCC, QFP, joint, CSP/BGA, long joint (below W45 x L100mm)
Simple put heavy load control (10 ~ 30 n), need to press in SMT special-shaped components (special connector, etc.)
Below the object element height: 25.5 mm
Before moving into the base plate above allowed height below 6.5 mm
Element types
119 (maximum/conversion into 8 mm tape) (note 1)
81 (maximum/conversion into 8 mm tape, when assembling sATS)
Power specifications: three-phase AC 200/208/220/240/220/240/416 V + 10% for 50/60 Hz
For the gas source: more than 0.45 MPa, clean and dry condition
Overall dimensions
L1, 1562 (flat side) of 665 x W x H 1445 mm above (cover)
L1, 665 x 1615 W (batch replacement car guide side) x H1, 445 m above (cover)
Body weight: about 1650 kg (only body)

• Kindly contact me if you are interested.
  Email: alice@ksunsmt.com
  Skype: alice@ksunsmt.com
  Whats app: +86 13170471806
  MP: 0086-13170471806