Aeroflex IFR 3500
Aeroflex IFR 3500
Aeroflex IFR 3500
3500 Radio Communications Test Set
The Aeroflex 3500 combines many of the features of a benchtop radio test set with the features of a Frequency Domain Reflectomer (FDR) into a lightweight, rugged and portable platform. The 3500 is perfect for testing AM and FM radio transceivers, whether on a bench, installed in a vehicle, or in some remote location.
NEW! Aeroflex's 3500 Hand-held Radio Test Set now has a new RF spectrum analyzer option. This new option allows users to see the frequency spectrum of the signal they are measuring.
Quick Drive By Testing to isolate radio installation failures
Isolate cable and antenna problems using Frequency Domain Reflectometry (FDR)
Benchtop type radio tests
New in Release 2.4.1
Return loss measurement
One port cable loss measurement
Audio Frequency counter meter
Additional Capabilities Include
2 MHz to 1 GHz operation
Transmitter and Receiver testing
AM and FM Modulation meter
Accurate RSSI measurement
Measuring high power (20 watts without an external attenuator, up to 150 watts with an external attenuator)
AF Generator and Modulator
RF Error meter
SINAD and Distortion measurement
Distance To Fault (DTF) measurement
Portable and Rugged
Weighs only 8.5 lbs. (3.9 kg)
5 hour battery life
-20ï¿.5 to +55ï¿.5 C operating temperature range
Rugged construction (specifications for humidity, altitude, shock, and vibration, MIL PRF 28800F Class II Certified)
New return loss and one port cable loss measurements enable comprehensive testing of antennas and cables
The 3500 Radio Test Set now allows the user to measure and graphically display return loss and cable loss. The return loss of an antenna or other device is displayed in graphical form as return loss (in dB) versus frequency. The loss of a cable is similarly displayed graphically as loss versus frequency. These two measurements are in addition to the VSWR and distance to fault (DTF) measurements that were already present on the 3500. With these four measurements, a complete analysis can be done on the cabling and antenna of a radio system.
New DCS generator and Audio Frequency Counter (AF Counter) expand the functionality of radio test in the 3500.
A DCS generator and AF Counter are the latest additions to the radio testing capabilities of the 3500. The DCS generator enables the testing of radios that require the DCS (Digital-Coded Squelch) to un-squelch the audio. The new Audio Frequency counter measures the frequency of audio tones, whether from the audio in port, or the demodulated audio.
Drive-by testing isolates radio installation failures
Design for portable operation, the 3500 is ideal for performing radio installation testing. By utilizing over the air testing techniques, a radio installed in a vehicle can be tested, without making a direct connection. A handset is included to help make voice quality measurements of the transmitter and receiver.
Benchtop type tests allow the 3500 to go further than simple go/no go testing
With the 3500 as your test tool, you have the capability to go past simple go/no go testing. The transmitter and receiver test screens include meters to measure transmitter parameters such as power, frequency and modulation. The receiver test screen includes meters to measure receiver sensitivity (SINAD) and audio distortion. The 3500 even includes two audio generators that can be used either at baseband or to modulate the transmitter. All of these features combine to make the 3500 a complete radio test set for FM and AM radio transceivers.
- See more at: http://www.testequipmentconnection.com/39084/Aeroflex_IFR_3500.php#sthash.rWmuqZCz.dpuf