Juki JM 50 Insertion Solution THT JUKI

Model:	Juki JM 50 Insertion Solution THT JUKI
Category:	THT Equipment
Model Year:	2024
Condition:	new
Location:	China
Offered by:	Qinyi Electronics Co.,Ltd
	Contact Qinyi Electronics Co.,Ltd

JUKI JM 50 Insertion Solution THT JUKI JM 50 Insertion Solution THT Lowest cost JUKI's JM-50 convinces with lowest entry costs for THT production when producing high-mix low-volume. Recognition of various component heights The new "Takumi head" has 4 nozzles and is equipped with a height-adjusting laser to optimize speed. This head can handle a wide range of components while maintaining the maximum speed. Flexibility New flexible feeders and new "Mini Chuck Nozzles" increase component range that can be handled at a time. PWB size 1 time clamping 50 × 50 mm ~ 410 × 360 mm 2 times clamping 50 × 50 mm ~ 800 × 360 mm Component Height max. 30 mm Component size Laser recognition: 0603 (metric) ~ 50 mm (square) 3 D Sensor: 3 mm (square) ~ 40 x 25 mm Insertion speed Vacuum: *0.6 sec / part *Under the conditions specified by JUKI Placement accuracy Laser recognition: ± 0.05 mm (3 σ) Vision recognition: ± 0.04 mm Feeder capacity Tape feeder in case of 8 mm tape: 56 (Optional Knock cyinder unit is required) MRF-S Radial Feeder 18 (9 on each of Front and Rear side) MRF-L Radial Feeder 14 (7 on each of Front and Rear side) MAF-S Axial Feeder 14 (7 on each of Front and Rear side) MAF-L Axial Feeder 10 (5 on each of Front and Rear side) Power supply 200 to 415 V AC 3-phase Apparent power 2.2 kVA Operation air pressure 0,5 ± 0,05 MPa Air consumption 75 L / min Machine dimension (W × D × H) 1,454 × 1,505 × 1,450 mm Weight (approx.) 1,300 kg Mass of conveying Maximum up to 2.000 kg Specifications and design subject to change without notice.